J175. Barati H., Wu M., Kharicha A., Ludwig A.: Steel Research int. 91 (2020) 2000230. DOI: 10.1002/srin.202000230
"Role of Solidification in Submerged Entry Nozzle Clogging During Continuous Casting of Steel"

J174. Vakhrushev A., Kahricha A., Liu Z., Wu M., Ludwig A., Nitzl G. tang Y., Hackl G., Watzinger J.: Metall. Mater. Trans. B (2020) 2811-2828. DOI:10.1007/s11663-020-01952-3
"Electric Current Distribution During Electromagnetic Braking in Continuous Casting"

J173. Rodrigues C., Ludwig A., Wu M., Kharicha A., Vakhrushev A.: J. Mat. Proc. Tech. 286 (2020) DOI:10.1016/j.jmatprotec.2020.116814
"Two-phase viscoplastic model for the simulation of twin roll casting"

J172. Stefan-Kharicha M., Kharicha A., Zaidat K., Reiss G., Eßl W., Goodwin F., Wu M., Ludwig A., Mugrauer C.: J. Crystal Groth. 541 (2020) DOI: 10.1016/j.jcrysgro.2020.125667
"Impact of hydrodynamics on growth and morphology of faceted crystals"

J171. Karimi-Sibaki E., Kharicha A., Wu M., Ludwig A., Bohacek J.: Metall. Mater. Trans. B 51 (2020) 871-879. DOI: 10.1007/s11663-020-01795-y
"A Numerical Investigation on the Electrochemical Behavior of CaO and Al ₂O ₃ in the ESR Slags"

J170. Mogeritsch J., Abdi M., Ludwig A.: Materials 13 (2020) 966:1-16. DOI:10.3390/ma13040966
"Investigation of Peritectic Solidification Morphologies by Using the Binary Organic Model System TRIS-NPG"

J169. Chaulet J., Kharicha A., Charmond S., Dussoubs B., Hans S., Wu M., Ludwig A., Jardy A.: Metals 10 (2020) 490:1-16. DOI: 10.3390/met10040490
"A 2D Multiphase Model of Drop Behavior during Electroslag Remelting"

J168. Karimi-Sibaki E., Kharicha A., Vakhrushev A., Wu M., Ludwig A., Bohacek J.: Electrochem. Comm. 112 (2020) 106675. DOI: 10.1016/j.elecom.2020.106675
"A volume of fluid (VOF) method to model shape change during electrodeposition"

J167. Zhang H., Wu M., Zhang Y., Ludwig A., Kharicha A.: Mat. Today Comm. 22 (2020) 100842. DOI: 10.1016/j.mtcomm.2019.100842
"Numerical study of the role of mush permeability in the solidifying mushy zone under forced convection"

J166. Karimi-Sibaki E., Kharicha A., Wu M., Ludwig A., Bohacek J.: Metall. Mater. Trans. B 51 (2020) 222-235. DOI:10.1007/s11663-019-01719-5
"A Parametric Study of the Vacuum Arc Remelting (VAR) Process: Effects of Arc Radius, Side-Arcing, and Gas Cooling"

J165. Karimi-Sibaki E., Kharicha A., Abdi M., Wu M., Ludiwg A., Bohacek J.: J. Electroch. Soc., 166 (2019) D521-D529. DOI: 10.1149/2.1241912jes
"A Dynamic Mesh Method to Model Shape Change during Electrodeposition."

J164. Wu M., Ludwig A., Kharicha A.: Metals 9 (2019) 229 1-43. DOI: 10.3390/met9020229
"Volume-Averaged Modeling of Multiphase Flow Phenomena during Alloy Solidification"

J163. Liu Z., Li B., Vakhrushev A., Wu M., Ludwig A.: Steel Research int. 90 (2019) 18020117 1-10. DOI: 10.1002/srin.201800117
"Physical and Numerical Modeling of Exposed Slag Eye in Continuous Casting Mold using Euler-Euler Approach"

J162. Liu Z., Li B., Wu M., Xu G., Ruan X., Ludwig A.: The Minerals, Met. & Mater. Soci ASM Int. 50A (2019) 1370-1379. DOI: 10.1007/s11661-018-5079-0
"An Experimental Benchmark of Non-metallic Inclusion Distribution Inside a Haavy Continuous-Casting Slab"

J161. Barati H., Kharicha A., Wu M., Ludwig A.: Metall. Mater. Trans. B 50 (2019) 1428-1443. DOI: 10.1007/s11663-019-01551-x
"Calculation Accuracy and Efficiency of a Transient Model for Submerged Entry Nozzle Clogging"

J160. Rodrigues C., Ludwig A., Wu M., Kharicha A., Vakhrushev A.: Metall. Mater. Trans. B 50 (2019)  1334-1350. DOI: 10.1007/s11663-019-01527-x
"A Comprehensive Analysis of Macrosegregation Formation During Twin- Roll Casting"

J159. Liu Z., Vakhrushev A., Wu M., Kharicha A., Ludwig A., Li B.: Metall. Mater. Trans. B 50 (2019) 543-554. DOI: 10.1007/s11663-018-1443-0
"Scale-Adaptive Simulation of Transient Two-Phase Flow in Continuous-Casting Mold"

J158. Stefan-Kharicha M., Kharicha A., Mogeritsch J., Wu M., Ludwig A.: J. Chem. Eng. Data 63 (2018) 3170−3183. DOI: 10.1021/acs.jced.7b01062
"Review of ammonium chloride-water solution properties"

J157. Rodrigues C., Ludwig A., Kharicha A., Wu M.: Trans. Indian Inst. Met. 71 (2018) 2645-2649. DOI: 10.1007/s12666-018-1423-8
"Modeling of the Twin-Roll casting Process: Transition from Casting to Rolling"

J156. Zhang H., Wu M., Zheng Y., Ludwig A., Kharicha A.: Trans. Indian Inst. Met. 71 (2018) 2639–2643. DOI:10.1007/s12666-018-1422-9
"Macrosegregation Formation in an Al-Si Casting Sample with Cross-sectional Change During Directional Solidification"

J155. Mogeritsch J., Ludwig A.: Res. & Dev. Materials Sci. 4 (2018) 1-3. DOI:10.31031/RDMS.2018.04.000580
"Investigation on Peritectic Layered Structures by Using the Binary Organic Components TRIS-NPG as Model Substances for Metal-Like Solidification"

J154. Liu Z., Vakhrushev A., Wu M., Karimi-Sibaki E., Kharicha A., Ludwig A., Li B.: Metals 8 (2018) 609:1-4. DOI:10.3390/met8080609
"Effect of an Electrically-Conducting Wall on Transient Magnetohydrodynamic Flow in a Continuous-Casting Mold with an Electromagnetic Brake"

J153. Karimi-Sibaki E., Kharicha A., Wu M., Ludwig A., Bohacek J.: J. Electroch. Soc., 165 (2018) E604-E615. DOI:10.1149/2.1201811jes
"Contribution of an Electro-Vortex Flow to Primary, Secondary and Tertiary Electric Current Distribution in an Electrolyte"

J152. Bohacek J., Kharicha A., Ludwig A., Wu M., Karimi-Sibaki E.: Metall. Mater. Trans. B 49 (2018) 1421-1433. DOI: 10.1007/s11663-018-1220-0
"Heat Transfer Coefficient at Cast-Mold Interface During Centrifugal Casting: Calculation of Air Gap"

J151. Stefan-Kharicha M., Kharicha A., Wu M., Ludwig A.: Metall. Mater.Trans. A, 49 (2018) 1708-1724. DOI: 10.1007/s11661-018-4489-3
"On the Coupling Mechanism of Equiaxed Crystal Generation with the Liquid Flow Driven by Natural Convection During Solidification"

J150. Barati H., Wu M., Kharicha A., Ludwig A.: Powder Technology 329 (2018) 181–198. DOI: 10.1016/j.powtec.2018.01.053
"A transient model for nozzle clogging"

J149. Zheng Y., Wu M., Karimi-Sibaki E., Kharicha A., Ludwig A.: Int. J. Heat and Mass Trans. 122 (2018) 939–953. DOI: 10.1016/j.ijheatmasstransfer.2018.02.012
"Use of a mixed columnar-equiaxed solidification model to analyse the formation of as-cast structure and macrosegregation in a Sn-10 wt% Pb benchmark experiment"

J148. Zheng Y., Wu M., Kharicha A., Ludwig A.: Modelling Simul. Mater. Sci. Eng. 26 (2018) 015004 1-18. DOI: 10.1088/1361-. 651X/aa86c5
"Incorporation of fragmentation into a volume average solidification model"

J147. Wu M., Ludwig A., Kharicha A.: Steel Res. Int. 89 (2018) 1700037 1-14. DOI: 10.1002/srin.201700037
"Simulation of As-Cast Steel Ingots"

J146. Wu M., Ahmadein M., Ludwig A.: Front. Mech. Eng. 13 (2018) 53–65. DOI: 10.1007/s11465-017-0437-y
"Premature melt solidification during mold filling and its influence on the as-cast structure"

J145. Karimi-Sibaki E., Kharicha A., Wu M., Ludwig A., Bohacek J.: Ionics 24 (2018) 2157-2165. DOI: 10.1007/s11581-018-2460-3
"Confrontation of the Ohmic approach for with the ionic transport approach for modeling the electrical behavior of an electrolyte"

J144. Karimi-Sibaki E., Kharicha A., Wu M., Ludwig A., Bohacek J.: Appl. Math. 357 (2018) 357-373. DOI: 10.1016/j.amc.2018.01.008
"Modeling electrochemical transport of ions in the molten CaF2 –FeO slag operating under a DC voltage"

J143. Kharicha A., Karimi-Sibaki E., Wu M., Ludwig A., Bohacek J.: Steel Res. Int. 89 (2018) 1700100 1-20. D OI: 10.1002/srin.201700100
"Review on Modeling and Simulation of Electroslag Remelting"

J142. Karimi-Sibaki E., Kharicha A., Wu M., Ludwig A., Bohacek J., Holzgruber H., Ofner B., Scheriau A., Kubin M.: Appl. Thermal Eng. 130 (2018) 1062–1069.
DOI: 10.1016/j.applthermaleng.2017.11.100
"A multiphysics model of the electroslag rapid remelting (ESRR) process"

J141. Bohacek J., Kharicha A., Ludwig A., Wu M., Karimi-Sibaki E., Paar A., Brandner M., Elizondo L., Trickl T.: Appl. Math. Comput. 319 (2018) 301-317.
DOI: 10.1016/j.amc.2017.03.030
"A (non-)hydrostatic free-surface numerical model for two-layer flows"

J140. Zheng Y., Wu M., Kharicha A., Ludwig A.: China Foundry Vol. 14 No.5 (2017) 321-326.
"Role of fragmentation in as-cast structure: numerical study and experimental validation"

J139. Wu M., Kharicha A., Ludwig A.: High Temp. Mater. Proc. 36 5 (2017) 531–539.
"Discussion on Modeling Capability for Macrosegregation"

J138. Tigrine Z., Mokhtari F., Bouabdallah A., Merah A., Kharicha A.: J. Fluids Engineering Vol. 139 (2017) 061201(1-9).
"Numerical Study of the Buoyancy Effect on Magnetohydrodynamic Three-Dimensional LiPb Flow in a Rectangular Duct"

J137. Karimi-Sibaki E., Kharicha A., Wu M., Ludwig A., Bohacek J.: Steel Res. Int. 88 No. 5 (2017) 1700011 (1-8).
"Toward Modeling of Electrochemical Reactions during Electroslag Remelting (ESR) Process"

J136. Ludwig A., Stefan-Kharicha M., Kharicha A., Wu M.: Metall. Mater. Trans. A, 48 (2017) 2927-31.
"Massive formation of equiaxed crystals by avalanches of mushy zone segments"

J135. Ludwig A., Mogeritsch J., Pfeifer T.: Acta Mater. 126 (2017) 329-35.
"In-situ observation of coupled peritectic growth in a binary organicmodel alloy"

J134. Wu M., Ludwig A., Kharicha A.: Appl. Math. Modelling, 41 (2017) 102-20.
"A four phase model for the macrosegregation and shrinkage cavity during solidification of steel ingot"

J133. Ludwig A., Mogeritsch J.: J. Crystal Growth 455 (2016) 99–104.
"Compact seaweed growth of peritectic phase on confined, flat properitectic dendrites"

J132. Vakhrushev A., Wu M., Ludwig A., Nitzl G., Tang Y., Hackl G., Wincor R.: Steel Res. Int. 87 (2016) 1600276:1-13.
"A Water Experiment Benchmark to Evaluate Numerical Models for the Motion of Particles in Continuous Casting Tundish"

J131. Zheng Y., Wu M., Kharicha A., Ludwig A.: Comp. Mater. Sci. 124 (2016) 456-70.
"Numerical analysis of macrosegregation in vertically solidified Pb-Sn test castings – Part II : Equiaxed solidification"

J130. Li Jun, Ge H., Wu M., Ludwig A., Li Jianguo: Acta Metallurgica Sinica 52 (2016) 1096-1104.
"A columnar & non-globular equiaxed mixed three-phase model based on thermosolutal convection and grain movement"

J129. Wu M., Zeng Y., Kharicha A., Ludwig A.: Comp. Mater. Sci. 124 (2016) 444-55.
"Numerical analysis of macrosegregation in vertically solidified Pb-Sn test castings - Part I: Columnar solidification."

J128. Ludwig A., Wu M., Kharicha A.: JOM, 68 (2016) 2191-7.
"Simulation in Metallurgical Processing: Recent Developments and Future Perspectives"

J127. Kharicha A, Wu M., Ludwig A., Karimi-Sibaki: Metall. Mater. Trans. B, 47 (2016) 1427-34.
"Simulation of the Electrical Signal During the Formation and Departure of Droplets in the Electro Slag Remelting Process"

J126. Karimi-Sibaki E., Kharicha A., Bohacek J., Wu M., Ludwig A.: Adv. Eng. Mater. 18 (2016) 224-30.
"On Validity of Axisymmetric Assumption for Modeling an Industrial Scale Electroslag Remelting Process"

J125. A. Kharicha, J. Bohacek,  A. Ludwig, M. Wu: J. Fluids Engineering 137 (2015) 1111505/1-10.
"Modified shallow water equations with application for horizontal centrifugal casting of rolls"

J124. J. Bohacek, A. Kharicha, A. Ludwig, M. Wu: Appl. Math. Comp., 267 (2015) 179-194.
“An approximate Riemann solver for shallow water equations and heat advection in horizontal centrifugal casting”

J123. Ludwig A., Vakhrushev A., Wu M., Holzmann T., Kharicha A.: Trans. Indian Inst. Met., 68 (2015) 1087–1094.
"Simulation of Crystal Sedimentation and Viscoplastic Behavior of Sedimented Equiaxed Mushy Zones"

J122. Wu M., Kharicha A., Ludwig A.: Materials China, 34 (2015) 640-651.
"Modelling As-Cast Structure and Macrosegregation in Ingot Casting"

J121. Karimi-Sibaki E., Kharicha A., Bohacek J., Wu M., Ludwig A.: Metall. Mater. Trans. B, 46 (2015) 2049-2061.
"A Dynamic Mesh-Based Approach to Model Melting and Shape of an ESR Electrode"

J120. Ludwig A., Wu M., Kharicha A.: Metall. Mater. Trans. A, 46 (2015) 4854-4867.
"On Macrosegregation"

J119. Ahmadein M., Wu M., Ludwig A.: J. Crystal Growth 417 (2015) 65-74.
"Analysis of macrosegregation formation and columnar-to-equiaxed transition during solidification of Al-4wt.%Cu ingot using a 5-phase model"

J118. Kharicha A., Teplyakov I., Ivochkin Yu., Wu M., Ludwig A., Guseva A.: Exp. Therm. Fluid Sci. 62 (2015) 192-201.
"Experimental and numerical analysis of free surface deformation in an electrically driven flow"

J117. Domitner J., Wu M., Ludwig A.: Steel Research Int., 86 (2015) 184-188.
"Numerical Study about the Influence of Small Casting Speed Variations on the Metallurgical Length in Continuous Casting of Steel Slabs"

J116. Stefan-Kharicha M., Kharicha A., Wu M., Ludwig A.: Fluid Dyn. Res. 46 (2014) 041424.
"Observation of flow regimes and transitions during a columnar solidification experiment"

J115. Wu M., Li J., Ludwig A., Kharicha A.: Computational Material Science, 92 (2014) 267–285.
"Modeling diffusion-governed solidification of ternary alloys – Part 2:Macroscopic transport phenomena and macrosegregation"

J114. Ludwig A., Kharicha A., Hölzl C., Domitner J., Wu M., Pusztai T.: Int. J. Engineering Analysis with Boundary Elements, 45 (2014) 29-35.
"3D Lattice Boltzmann flow simulations through dendritic mushy zones"

J113. Kharicha A., Ludwig A., Wu M.: ISIJ Int., 54 (2014) 1621-1628.
"On Melting of Electrodes during Electro-Slag Remelting"

J112. Li J., Wu M., Ludwig A., Kharicha A.: Mater. Sci. Forum, 790-791 (2014) 121-126.
"Prediction of macrosegregation in steel ingot using a simplified denderitic model"

J111. Ludwig A., Mogeritsch J.: Mater. Sci. Forum, 790-791 (2014) 317-322.
"Recurring instability of cellular growth in a near peritectic transparent NPG-TRIS alloy system"

J110. Karimi-Sibaki E., Kharicha A., Wu M., Ludwig A., Korp J.: Mater. Sci. Forum, 790-791 (2014) 396-401.
"Influence of crystal morphological parameters on the solidification of ESR ingot"

J109. Ahmadein M., Wu M., Schumacher P., Ludwig A.: Mater. Sci. Forum, 790-791 (2014) 67-72.
"A numerical study of the influence of pouring technique on the as-cast structure of Al-Cu ingots"

J108. Ahmadein M., Wu M., Stefan-Kharicha M., Kharicha A., Ludwig A.: Mater. Sci. Forum, 790-791 (2014) 247-52.
"Evaluation of a 5-phase mixed columnar-equiaxed solidification model with a benchmark solidification experiment of NH4Cl-H2O solution"

J107. Wu M., Kharicha A., Ludwig A.: Mater. Sci. Forum, 790-791 (2014) 85-90.
"Numerical Study of the Influence of Diffusion-Governed Growth Kinetics on Macrosegregation"

J106. Vakhrushev A., Wu M., Ludwig A., Tang Y., Hackl G., Nitzl G.: Metall. Mater. Trans. B., 45 (2014) 1024-37.
“Numerical investigation of shell formation in thin slab casting of funnel-type mould”

J105. Bohacek J., Kharicha A., Ludwig A., Wu. M.: ISIJ International, 54 (2014) 266-274.
"Simulation of Horizontal Centrifugal Casting: Mold filling and Solidification"

J104. Domitner J., Wu M., Kharicha A., Ludwig A., Kaufmann B., Reiter J., Schaden T.: Metall. Mater. Trans. A, 45 (2014) 1415-1434.
"Modeling the effect of strand surface bulging and mechanical softreduction on the macrosegregation formation in steel continuous casting"

J103. Li J., Wu M., Ludwig A., Kharicha A.: Int. J. Heat and Mass Transfer 72 (2014) 668-679.
"Simulation of Macrosegregation in a 2.45-ton Steel Ingot Using a Three-Phase Mixed Columnar-Equiaxed Model"

J102. Ludwig A., Wu M., Kharicha A.: Metall. Mater. Trans. B 45 (2014) 36-43.
"Modeling of Multiscale and Multiphase Phenomena in Materials Processing"

J101. Wu M., Li J., Ludwig A., Kharicha A.: Computational Material Science, 79 (2013) 830–840.
"Modelling diffusion-governed solidification of ternary alloys - Part 1: Coupling solidification kinetics with thermodynamics"

J100. Ahmadein M., Wu M., Li J., Schumacher P., Ludwig A.: Metall. Mater. Trans. A, 44 (2013) 2895-2903.
"Prediction of the As-Cast Structure of Al-4.0 wt. pct Cu Ingots"

J99. Kharicha A., Stefan-Kharicha M., Ludwig A., Wu M.: Metall. Mater. Trans. A, 44 (2013) 661-668.
"Simultaneous observation of melt flow and motion of equiaxed crystals during solidification using a dual phase Particle Image Velocimetry technique. Part II: Relative velocities"

J98. Kharicha A., Stefan-Kharicha M., Ludwig A., Wu M.:  Metall. Mater. Trans. A, 44 (2013) 650-660.
"Simultaneous observation of melt flow and motion of equiaxed crystals during solidification using a dual phase Particle Image Velocimetry technique. Part I:   Stages characterization of melt flow and equiaxed crystals motion"

J97. Domitner J., Kharicha A., Wu M., Ludwig A.: Metall. Mater. Trans. A, 44 (2013) 607-616.
"Application of microprobe analysis to the reconstruction and characterization of dendritic structures"

J96. Kharicha A., Wu M., Ludwig A., Karimi-Sibaki E.: J. Iron and Steel Research International, Vol.19 Supplement 1-1 (ISSN 1006-706X-CN11-3678/TF), (2012) 63-66.
"Influence of the earth magnetic field on electrically induced flows"

J95. Ludwig A., Mogeritsch J., Kolbe M., Gerhard Z., Sturz L., Bergeon N., Faivre G., Billia B., Akamatsu S., Bottin-Rousseau S., Voss D.: JOM 64 (2012) 1097-101.
"Adv. Solidification Studies on Transparent Alloy Systems: A New European Solidification Insert for Material Science Glovebox on Board the Int. Space Station"

J94. Ludwig A., Grasser M., Schillinger W.: World of Metallurgy, 65 (2012) 117-25.
"Experimental investigation on the ternary phase diagram Cu-Sn-P"

J93. Grasser M., Ludwig A., Schillinger W.: Int. J. Materials Research, 103 (2012) E1–7.
"Thermodynamic description of the system Cu-Sn-P: experimental and numerical invigation"

J92. Li J., Wu M., Hao J., Ludwig A.: Comp. Mater. Sci., 55 (2012) 407-418.
"Simulation of channel segregation using a two-phase columnar solidification model, Part I: Model description and verification”

J91. Li J., Wu M., Hao J., Kharicha A., Ludwig A.: Comp. Mater. Sci., 55 (2012) 419-429.
"Simulation of channel segregation using a two-phase columnar solidification model, Part II: Mechanism and parameter study”

J90. Wu M., Domitner J., Ludwig A.: Metall. Mater. Trans. A, 43(2012) 945-964.
"Using a two-phase columnar solidification model to study the principle of mechanical softreduction in slab casting”

J89. Unterreiter G., Ludwig A., Wu M.: China Foundry, 3 (2011) 331-336.
"Numerical microstructure prediction for an aluminium casting and its experimental validation"

J88. Unterreiter G., Wlanis T., Ludwig A., Wu M., Sommitsch Ch., Mayer F.: Special Edition of Int. J. of Multiphysics, Multiphysics Simulations – Advanced Methods for Industrial Engineering, (2011) 209-217.
"Through-process simulation of aluminium casting A356-simulation of solidification and stress analysis during heat treatment"

J87. Hao J., Wu M., Ludwig A., Grasser M.: Adv. Materials Research, 154-5 (2011) 1415-8.
"Numerical study of the thermosolutal convection induced macrosegregation during columnar solidification"

J86. Hao J., Grasser M., Wu M., Ludwig A.: Adv. Materials Research, 154-5 (2011) 1401-4.
"Numerical study and experimental investigation of solidification phenomena in semi-continuous casting of Bronze"

J85. Wu M., Fjeld A. and Ludwig A.: Comp. Mater.Sci., 50 (2010) 32-42.
"Modeling mixed columnar-equiaxed solidification with melt convection and grain sedimentation-Part I: Model description"

J84. Wu M., Ludwig A., Fjeld A.: Comp. Mater. Sci.,50 (2010) 43-58.
"Modeling mixed columnar-equiaxed solidification with melt convection and grain sedimentation-Part II: Illustrative modeling results and parameter studies"

J83. Mayer F., Wu M., Ludwig A.: Steel Research Int., 81 (2010) 660-7.
"On the Formation of Centreline Segregation in Continuous Slab Casting of Steel due to Bulging and/or Feeding"

J82. Domitner J., Kharicha A., Grasser M., Ludwig A.: SteelResearch Int., 81, (2010) 644-651.
"Reconstruction of Three-Dimensional Dendritic Structures Based on the Investigation of Microsegregation Patterns"

J81. Wu M., Vakhrushev A., Nunner G., Pfeiler C., Kharicha A., Ludwig A.: Open Transp. Phenomena J., 2 (2010) 16-23.
"Importance of Melt Flow in Solidifying Mushy Zone”

J80. Kharicha A., Schützenhöfer W., Ludwig A., Reiter G.: Mater. Sci. Forum, 649 (2010) 229-36.
"Influence of the slag/pool interface on the solidification in an electroslag remelting process"

J79. Könözsy L., Ishmurzin A., Grasser M., Wu M., Ludwig A., Tanzer R., Schützenhöfer W.:  Mater. Sci. Forum, 649 (2010) 349-54.
"Columnar to Equiaxed Transition During Ingot Casting Using Ternary Alloy Composition"

J78. Könözsy L., Stefan-Kharicha M , Eck S., Wu M., Ludwig A.: Mater. Sci. Forum, 649 (2010) 367-72.
"Numerical and Experimental Investigation of NH4Cl Solidification"

J77. Mogeritsch J., Eck S., Grasser M., Ludwig A.: Mater.Sci. Forum, 649 (2010) 159-64.
"In situ observation of solidification in an organic peritectic alloy system"

J76. Ludwig A., Mogeritsch J., Grasser M.: Trans. Indian Inst. Metals, 62 (2009) 433-6.
"In-situ Observation of Unsteady Peritectic Growth Modes"

J75. Wu M., Ludwig A.: Acta Mater., 57 (2009) 5621-31.
"Modeling Equiaxed Solidification with Melt Convection and Grain Sedimentation, Part I: Model Description"

J74. Wu M., Ludwig A.: Acta Mater., 57 (2009) 5632-44.
"Modeling Equiaxed Solidification with Melt Convection and Grain Sedimentation, Part II: Model Verification"

J73. Mogeritsch J., Ludwig A., Eck S., Grasser M., McKay B.: Scripta Mater., 60 (2009) 882-5.
"Stability investigations of a binary organic alloy system with a peritectic phase diagram"

J72. Odenthal H.J., Rexroth C.H., Sommerfeld M., Ludwig A., Baake E., Thess A.: Stahl und Eisen, 129 (2009) 37-46.
"Verbesserte metallurgische Prozesse durch moderne Simulationstechnik"

J71. A. Fjeld, Ludwig A.: Int. J. Cast Metals Research, 22(2009) 111-4.
"Flow Patterns and Re-melting During the Filling of a Large Composite Casting"

J70. Eck S., Pfeiler C., Mayer F., Ludwig A., Evans J.W.: Int.J. of Cast Metals Research, 22 (2009) 74-7.
"Experimental and Numerical Modelling of the Flow Field in a CuxSny Direct Chill Caster"

J69. Tanzer R., Schützenhöfer W., Reiter G., Fauland H.P., Könözsy L., Ishmurzin A., Wu M., Ludwig A.: Metall. Mater. Trans.B, 40 (2009) 305-11.
"Validation of a Multiphase Model for the Macrosegregation and Primary Structure of High Grade Steel Ingots"

J68. Wu M., Ludwig A.: Int. J. Cast Metals Research,22 (2009) 323-7.
"An idea to treat the dendritic morphology in the mixed columnar-equiaxed solidification"

J67. Kharicha A., Schützenhöfer W., Ludwig A., Tanzer R., Wu M.: Int. J. Cast Metals Research, 22 (2009) 155-9.
"Reformulation of the Joule heating in presence of turbulent fluctuation"

J66. Stefan-Kharicha M., Eck S., Könözsy L., Ludwig A., Kharicha A.: Int. J. Cast Metals Research, 22 (2009) 168-71.
"Experimental and Numerical Investigations of NH4Cl Solidification in a Mould. Part 1: Experimental Results"

J65. Könözsy L., Eck S., Stefan-Kharicha M., Wu M., Ludwig A.: Int. J. Cast Metals Research, 22 (2009) 172-4.
"Experimental and Numerical Investigations of NH4Cl Solidification in a Mould. Part 2: Numerical Results"

J64. Könözsy L., Ishmurzin A., Mayer F., Grasser M., Wu M., Ludwig A.: Int. J. Cast Metals Research, 22 (2009) 175-8.
"Numerical Investigation of Grid Influence on the Formation of Macrosegregation"

J63. Wu M., Ludwig A., Pfeiler C., Mayer F.: J. Iron and Steel Res. Int., 15 (2008) 30-7.
"Multiphase Flow Modeling and Its Application Potentials in Steel Continuous Casting"

J62. Ishmurzin A., Gruber-Pretzler M., Mayer F., Wu M., Ludwig A.: Int. J. Mat. Res., 99 (2008) 618-25.
"Multiphase/Multicomponent Modeling of Solidification Processes: Coupling Solidification Kinetics with Thermodynamics"

J61. Wu M., Könözsy L., Ludwig A., Schützenhöfer W., Tanzer R.: Steel Research Int., 79 (2008) 637-44.
"On the Formation of Macrosegregations in Steel Ingot Castings"

J60. Kharicha A., Schützenhöfer W., Ludwig A., Tanzer R., Wu M.: Steel Research Int., 79 (2008) 632-36.
"On the Importance of Electric Currents Flowing directly  into the Mould during an ESR Process"

J59. Pfeiler C., Thomas B. G., Wu M., Ludwig A., Kharicha A.: Steel Research Int., 79 (2008) 599-607.
"Solidification and Particle Entrapment during Continuous Casting of Steel"

J58. Ratke, L., Brück, S, Mathiesen, R., Ludwig, A., Gruber-Pretzler, M., Tonn, B., Gzovskyy, K., Gránásy, L., Tegze, G., Agren, J., Höglund, L., Arnberg, L., Gust, E., Anger, G., Lauer, M., Garen, R., Reifenhäuser, B.: Trans. Indian Inst. of Metals, 60 (2007) 103-111.
"Lead-free bearing alloys for engine applications results of the ESA-MAP project MONOPHAS"

J57. Bulla A., Carreno-Bodensiek C., Pustal B., Berger R., Bührig-Polaczek A., Ludwig A.: Met. Mat. Trans. A, 38 (2007) 1956-64.
"Determination of the Solid-Liquid Interface Energy in the Al-Cu-Ag System"

J56. Wu M., Ludwig A.: Metall. Mater. Trans. A, 38 (2007) 1465-75.
"Using a Three-Phase Deterministic Model for Columnar-to Equiaxed Transition"

J55. Wu M., Ludwig A.: Metall. Mater. Trans. A, 37 (2006) 1613-31.
"A 3-phase model for Mixed Columnar-Equiaxed Solidification"

J54. Wang T.M., Li T.J., Cao Z.Q., Jin J.Z., Grimming T., Bührig-Polaczek A., Wu M., Ludwig A.: Acta Metall. Sinica, 42 (2006) 591-8.
"Modelling of the Thermo-Solutal Convection, Shrinkage Flow and Grain Movement during Globular Equiaxed Solidification in a Multiphase System – II. Application of Model"

J53. Wang T.M., Yao S., Zhang X.G., Jin J.Z., Wu M., Ludwig A., Pustal B., Bührig-Polaczek A.: Acta Metall. Sinica, 42 (2006) 584-90.
"Modelling of the Thermo-Solutal Convection, Shrinkage Flow and Grain Movement during Globular Equiaxed Solidification in a Multiphase System - I. Three-Phase Flow Model"

J52. Wu M., Ludwig A.: JOM-e, Dec. 2006, "Visualizations - Defects in Casting Processes", eds.: Thomas B.G., Sengupta J. Abstract in JOM, 58 (2006) 16-18.
"Modeling Macrosegregation with a Multiphase Approach: Examples and Applications"

J51. Ludwig A., Gruber-Prezler M., Wu M., Kuhn A., Riedle J.: Int. J. Fluid Dynamic Materials Processing, 1 (2006) 285-300.
"About the Formation of Macrosegregations During Continuous Casting of Sn-Bronze"

J50. Eck S., Mogeritsch J., Ludwig A.: Mater. Sci. Forum, 508 (2006) 157-62.
"Experimental Observation of Convection during Equiaxed Solidification of Transparent Alloys"

J49. Ludwig A., Wu M., Abondano A., Ratke L.: Mater. Sci. Forum, 508 (2006) 193-8.
"Gravity-Induced Convection during Directional Solidification of Hypermonotectic Alloys"

J48. Pfeiler C., Wu M., Ludwig A.: Mater. Sci. Eng. A, 413-4 (2005) 115-20.
"Influence of Argon Gas Bubbles and Non-Metallic Inclusions on the Flow Behaviour in Steel Continuous Casting"

J47. Ludwig A., Gruber-Pretzler M., Mayer F., Ishmurzin A., Wu M.: Mater. Sci. Eng. A, 413-4 (2005) 485-9.
"A Way of Coupling Ternary Phase Diagram Information with Multiphase Solidification Simulations"

J46. Ludwig A., Wu M.: Mater. Sci. Eng. A, 413-4 (2005) 109-14.
"Modelling the Columnar-to-Equiaxed Transition with a 3-Phase Eulerian Approach"

J45. Wu M., Ludwig A.: Mater. Sci. Eng. A, 413-4 (2005) 192-9.
"Study of Spatial Phase Separation during Solidification and Its Impact on the Formation of Macrosegregations"

J44. Eck S., Stefan-Kharicha M., Ishmurzin A., Ludwig A.: Mater. Sci. Eng. A, 413-4 (2005) 79-84.
"Measurement and Simulation of Temperature and Velocity Fields during the Cooling of Water in a Die Casting Model"

J43. Kharicha A., Ludwig A., Wu M.: Mater. Sci. Eng. A, 413-4 (2005) 129-34.
"Shape and Stability of the Slag/Melt Interface in a Small DC ESR Process"

J42. Wang T., Wu M., Ludwig A., Abondano M.,  Pustal B., Bührig-Polaczek A.: Int. J. Cast Metals Research, 18 (2005) 221-8.
"Modelling the Thermosolutal Convection, Shrinkage Flow and Grain Movement of Globular Equiaxed Solidification Using a Three Phase Model"

J41. Wang T., Pustal B., Abondano M., Grimmig T., Bührig-Polaczek A. A., Wu M., Ludwig A.: Trans. Nonferrous Metals Society of China, 15 (2005) 1-6.
"Simulation of the Cooling Channel Rheocasting Process of A356 Aluminium Alloy Using a Three-Phase Volume Averaging Model"

J40. Wu M., Ludwig A., Pelzer M., Postl U.: Adv. Eng. Mater., 7-9 (2005) 846-51.
"On the Impact of Macroscopic Phase Separation on Solidification Microstructures"

J39. Kron J., Bellet M., Ludwig A., Pustal B., Wendt J., Fredriksson H.: Int. J. Cast Metal Research, 17 (2005) 295-310.
"On Distortions and Gap Formation during Solidification and Subsequent Cooling of a Cylindrical Casting"

J38. Wu M., Ludwig A., Luo J.: Mater. Sci. Forum, 475-9 (2005) 2725-30.
"Numerical Study of the Thermal-Solutal Convection and Grain Sedimentation during Globular Equiaxed Solidification"

J37. Neumann L., Kopp R., Ludwig A., Wu M., Bührig-Polaczek A., Schneider M., Crumbach M., Gottstein G.: Modelling Simul. Mater. Sci. Eng., 12 (2004) 19-31.
"Simulation of Casting, Homogenization, and Hot rolling: Consecutive Process and Microstructure Modelling for Aluminum Sheet Production"

J36. Aguilar J., Fehlbier M., Ludwig A., Bührig-Polaczek A., Sahm P.: Mater. Sci. Eng. A, 375-7 (2004) 651-5.
"Non-Equilibrium Globular Microstructure suitable for Semi-Solid Casting of Light Metal Alloys by Rapid-Slug-Cooling-Technology (RSCT) "

J35. Ludwig A., Leibbrandt S.: Mater. Sci. Eng. A, 375-7 (2004) 540-6.
"Generalised ‘Jackson-Hunt’ Model for Eutectic Solidification at Low And Large Peclet Numbers And Any Binary Eutectic Phase Diagram"

J34. Wu M., Ludwig A., Ratke L.: Met. Mat. Trans. A, 34 (2003) 3009-19.
"Modelling Marangoni Induced Droplet Motion and Convection During Solidification of Hypermonotectic Alloys"

J33. Pustal B., Böttger B., Ludwig A., Sahm P.: Mat. Met. Trans. B, 34 (2003) 411-9.
"Macro- and Microscopic Coupled Numerical Simulation of Microsegregation during Diffusion Controlled Solidification of Multi-Component Alloys"

J32. Wu M., Ludwig A., Ratke L.: Modell. Simu. Mat. Sci. Eng., 11 (2003) 755-69.
"Modeling of Marangoni Convection during Solidification of Hypermonotectic Alloys"

J31. Ehlen G., Ludwig A., Sahm P.: Metall. Mater. Trans. A, 34 (2003) 2947-61.
"Time Dependent Simulation of Pool Shape during Laser Spot Welding"

J30. Wu M., Ludwig A., Bührig-Polaczek A., Fehlbier M., Sahm P.: Int. J. Heat Mass Transfer., 46 (2003) 2819-32.
"Influence of Convection and Grain Movement on Globular Equiaxed Solidification"

J29. Kron J., Bellet M., Ludwig A., Wendt J., Pustal B., Fredriksson H.: Adv. Eng. Mater., 5 (2003) 78-9.
"Cooperation within MEBSP on the Subject of Air Gap Formation During a Casting Process"

J28. Wu M., Ludwig A.: Adv. Eng. Mater., 5 (2003) 62-6.
"Influence of Phase Transport Phenomena on Macrosegregation and Structure Formation During Solidification"

J27. Lacaze J., Greer L., Howe A., Ludwig A., Fredrikson H.: Adv. Eng. Mater., 5 (2003) 11-6.
"Microstructure Control by Solidification Processing – Outcome from a European Thematic Network"

J26. Ludwig A., Wu M.: Metall. Mater, Trans. A, 33 (2002) 3673-83.
"Modeling of Globular Equiaxed Solidification with a Two-Phase Approach"

J25. Ludwig A.: Int. J. Thermophysics, 23 (2002) 1131-5.
"Thermophysical Properties Necessary for Advanced Casting Simulations"

J24. Ludwig A., Pustal B., Herlach D.M.: Mater. Sci. Eng. A, 318 (2001) 337-40.
"General Concept for a Stability Analysis of a Planar Interface under Rapid Solidification Conditions in Multicomponent Alloy Systems"

J23. Ludwig A., Quested P., Neuer G.: Adv. Eng. Materials, 3 (2001) 11-5.
"How to Find Thermophysical Material Property Data for Casting Simulations?"

J22. Ludwig A.: Acta Mater., 49 (2001) 165-9.
"Comparison of Dendrites of a Pure Material with Thermal Alloy Dendrites: an Experimental Method to Estimate the T0-Temperature"

J21. Ehlen G., Schweizer A., Ludwig A., Sahm P.: Mater. Sci. Forum, 329-30 (2000) 105-9.
"Influence of Convection and Surface Effects on Macrosegregations in Eutectic and Peritectic Systems"

J20. Ludwig A., Schillings A., Ehlen G.: Mater. Sci. Forum, 329-30 (2000) 19-23.
"Solute Trapping in Highly Undercooled Succinonitrile-Acetone Alloys"

J19. Greven K., Ludwig A., Sahm P.: J. Appl. Phys., 86 (1999) 3682-7.
"Time Dependent Interface Stability During Rapid Solidification"

J18. Ludwig A.:  Phys. Rev. E, 59 (1999) 1893-7.
"Dendritic and Cellular Doublets: Morphologies of Thin Solid Films Growing Along a Substrate During the Initial State of the Solidification of Bulk Melts"

J17. Yoo S., Moenipour K., Ludwig A., Sahm P.: Int. J. Cast Metals Res., 11 (1999) 483-6.
"Numerical Simulation and Experimental Results of in-situ Heat Treated Austempered Ductile Iron"

J16. Ludwig A.: Physica D, 124 (1998) 271-5.
"The Interface Response-Functions in Multi-componental Alloy Solidification"

J15. Ludwig A., Greven K., Sahm P.: J. Cryst. Growth, 186 (1998) 291-7.
"Morphological Stability of a Planar Interface Subject to Rapid Quenching"

J14. Ludwig A., Schadt R., Sahm P.: Mater. Sci. Eng. A, 226-8 (1997) 124-8.
"In-Situ Observation of Cellular Growth under Rapid Solidification Conditions"

J13. Fackeldey M., Ludwig A., Sahm P.: Comp. Mater. Sci., 7 (1996) 194-8.
"Coupled Modelling of the Solidification Process Predicting Temperatures, Stresses and Microstructures"

J12. Ludwig A., Kurz W.: Scripta Mater., 35 (1996) 1217-20.
"Cellular Growth of a Dilute Binary Alloy at High Solidification Velocity"

J11. Ludwig A., Kurz W.: Acta Mater., 44 (1996) 3643-8.
"Direct Observation of Solidification Microstructures around Absolute Stability"

J10. Ludwig A.: Scripta Mater., 34 (1996) 579-84.
"Hypercooling of an Organic Alloy Melt"

J9. Ludwig A., Kurz W., Mater. Sci. Forum, 215-6 (1996) 13-20.
"On the Morphological Transition from Cellular to Planar Growth at High Solidification Velocity"

J8. Ludwig A., Wagner I., Laakmann J., Sahm P.: Mater. Sci. Eng. A, 178 (1994) 299-303.
"Undercooling of Superalloy Melts: Basis of a New Manufacturing Technique for Single-Crystal Turbine Blades"

J7. Frommeyer G., Ludwig A.: Steel Research, 63 (1992) 399-403.
"High-Speed Temperature Measurements During Rapid Solidification of Iron-Silicon Ribbons Produced by Planar Flow Casting"

J6. Gránásy L., Ludwig A.: Mater. Sci. Forum, 77 (1991) 211-5.
"Simulation of the Dendritic Solidification During Single Roller Quenching"

J5. Ludwig A.: Acta Metall. Mater., 39 (1991) 2795-9.
"Limit of Absolute Stability for Crystal Growth into Undercooled Alloy Melts"

J4. Ludwig A., Frommeyer G., Gránásy L.: Mater. Sci. Eng. A, 133 (1991) 722-5.
"Modeling of Dendritic Growth During the Ribbon Formation in Planar Flow Casting"

J3. Gránásy L., Tegze M., Ludwig A.: Mater. Sci. Eng. A, 133 (1991) 577-80.
"Solid-Liquid Interfacial Free Energy"

J2. Gránásy L., Ludwig A.: Mater. Sci. Eng. A, 133 (1991) 751-4.
"Heat Transfer in the Single Roller Quenching Methods"

J1. Ludwig A., Frommeyer G., Gránásy L.: Steel Research, 61 (1990) 467-70.
"Modeling of Crystal Growth During the Ribbon Formation in Planar Flow Casting"