Here, we have gathered publications written by the chair (starting from 2012) which contribute to specific research topics:

J120. Ludwig A., Wu M., Kharicha A.: Metall. Mater. Trans. A, 46 (2015) 4854-4867
"On Macrosegregation"

J102. Ludwig A., Wu M., Kharicha A.: Metall. Mater. Trans. B 45 (2014) 36-43.
"Modeling of Multiscale and Multiphase Phenomena in Materials Processing"

J176. Zhang H., Wu M., Tewari S.N., Ludwig A., Kharicha A.: J. Mat. Proc. Tech. 288 (2021) 116913. DOI: 10.1016/j.jmatprotec.2020.116913
"Geometrical effect on macrosegregation formation during unidirectional solidification of Al–Si alloy"

C189. Zhang H., Wu M., Zhang Z., Ludwig A., Kharicha A.: MCWASP XV, IOP Conf. Series: Mater. Sci. Eng. 861 (2020) 012048. DOI: 10.1088/1757-899X/861/1/012048
"Influence of crystal fragmentation on the formation of microstructure and macrosegregation during directional solidification under forced convection condition"

C188. Rodrigues C., Ludwig A., Wu M., Kharicha A., Vakhrushev A.: MCWASP XV, IOP Conf. Series: Mater. Sci. Eng. 861 (2020) 012042. DOI:10.1088/1757-899X/861/1/012042
"Impact of crystal sedimentation and viscoplastic semi-solid dynamics on macrosegregation"

J160. Rodrigues C., Ludwig A., Wu M., Kharicha A., Vakhrushev A.: Metall. Mater. Trans. B 50 (2019)  1334-1350. DOI: 10.1007/s11663-019-01527-x
"A Comprehensive Analysis of Macrosegregation Formation During Twin- Roll Casting"

C176. Rodrigues C., Ludwig A., Wu M., Kharicha A., Vakhrushev A.: 5th Int. Conf. on Adv. Solid. Proc. (ICASP-5) combined with 5th Int. Symp. on Cutting Edge of Comp. Sim. of Solid., Cast. and Refining, Salzburg, Austria, IOP Conf. Series: Mater. Sci. & Eng., 529 (2019) 012041.DOI:10.1088/1757-899X/529/1/012041
"On the modelling of macrosegregation during twin-roll casting"

J156. Zhang H., Wu M., Zheng Y., Ludwig A., Kharicha A.: Trans. Indian Inst. Met. 71 (2018) 2639–2643. DOI:10.1007/s12666-018-1422-9
"Macrosegregation Formation in an Al-Si Casting Sample with Cross-sectional Change During Directional Solidification"

J149. Zheng Y., Wu M., Karimi-Sibaki E., Kharicha A., Ludwig A.: Int. J. Heat and Mass Trans. 122 (2018) 939–953. DOI: 10.1016/j.ijheatmasstransfer.2018.02.012
"Use of a mixed columnar-equiaxed solidification model to analyse the formation of as-cast structure and macrosegregation in a Sn-10 wt% Pb benchmark experiment"

J139. Wu M., Kharicha A., Ludwig A.: High Temp. Mater. Proc. 36 5 (2017) 531–539.
"Discussion on Modeling Capability for Macrosegregation"

J134. Wu M., Ludwig A., Kharicha A.: Appl. Math. Modelling, 41 (2017) 102-20.
"A four phase model for the macrosegregation and shrinkage cavity during solidification of steel ingot"

J131. Zheng Y., Wu M., Kharicha A., Ludwig A.: Comp. Mater. Sci. 124 (2016) 456-70.
"Numerical analysis of macrosegregation in vertically solidified Pb-Sn test castings – Part II : Equiaxed solidification"

J129. Wu M., Zeng Y., Kharicha A., Ludwig A.: Comp. Mater. Sci. 124 (2016) 444-55.
"Numerical analysis of macrosegregation in vertically solidified Pb-Sn test castings - Part I: Columnar solidification."

C160. Zheng Y., Wu M., Kharicha A., Ludwig A.: IOP Conf. Series: Mate. Sci. Eng., 119 (2016) 012004.
"Simulation of thermo-solutal convection induced macrosegregation in a Sn-10% Pb alloy benchmark during columnar solidification"

C153. Zheng Y., Wu M., Kharicha A., Ludwig A.: IOP Conf. Series: Materials Science and Engineering (LMPC-15) 143 (2016) 012032.
"Simulation of macrosegregation in a large vertical continuous casting of steel"

J122. Wu M., Kharicha A., Ludwig A.: Materials China, 34 (2015) 640-651.
"Modelling As-Cast Structure and Macrosegregation in Ingot Casting"

J120. Ludwig A., Wu M., Kharicha A.: Metall. Mater. Trans. A, 46 (2015) 4854-4867.
"On Macrosegregation"

J119. Ahmadein M., Wu M., Ludwig A.: J. Crystal Growth 417 (2015) 65-74.
"Analysis of macrosegregation formation and columnar-to-equiaxed transition during solidification of Al-4wt.%Cu ingot using a 5-phase model"

J117. Domitner J., Wu M., Ludwig A.: steel research int., 86 (2015) 184-188.
"Numerical Study about the Influence of Small Casting Speed Variations on the Metallurgical Length in Continuous Casting of Steel Slabs"

C146. Wu M., Ludwig A., Kharicha A.: 6th. Int. Conf. "SteelSim 2015", Bordolino, Italy, on data storage device.
"An attempt to model shrinkage cavity coupled with macrosegregation in steel ingots"

C143. Hao J., Lin Y.J., Nie Y., Wu M., Ludwig A.: MCWASP XIV (14th Modeling of Casting, Welding and Adv. Solidification Processes) Awaji island, Hyogo, Japan, 21-26 June (2015), Ed.: H. Yasuda, IOP Conf. Series: Materials Science and Engineering 84 (2015) 012061.
"Modelling of macrosegregation in direct chill casting considering columnar-to-equiaxed transition using 3-phase Eulerian approach"

C140. Wu M., Kharicha A., Ludwig A.: MCWASP XIV (14th Modeling of Casting, Welding and Adv. Solidification Processes) Awaji island, Hyogo, Japan, 21-26 June (2015), Ed.: H. Yasuda, IOP Conf. Series: Materials Science and Engineering 84 (2015) 012006.
"Using four-phase Eulerian volume averaging approach to model macrosegregation and shrinkage cavity"

J115. Wu M., Li J., Ludwig A., Kharicha A.: Computational Material Science, 92 (2014) 267–285.
"Modeling diffusion-governed solidification of ternary alloys – Part 2:Macroscopic transport phenomena and macrosegregation"

J112. Li J., Wu M., Ludwig A., Kharicha A.: Mater. Sci. Forum, 790-791 (2014) 121-126.
"Prediction of macrosegregation in steel ingot using a simplified denderitic model"

J107. Wu M., Kharicha A., Ludwig A.: Mater. Sci. Forum, 790-791 (2014) 85-90.
"Numerical Study of the Influence of Diffusion-Governed Growth Kinetics on Macrosegregation"

J104. Domitner J., Wu M., Kharicha A., Ludwig A., Kaufmann B., Reiter J., Schaden T.: Metall. Mater. Trans. A, 45 (2014) 1415-1434.
"Modeling the effect of strand surface bulging and mechanical softreduction on the macrosegregation formation in steel continuous casting"

J103. Li J., Wu M., Ludwig A., Kharicha A.: Int. J. Heat and Mass Transfer 72 (2014) 668-679.
"Simulation of Macrosegregation in a 2.45-ton Steel Ingot Using a Three-Phase Mixed Columnar-Equiaxed Model"

J101. Wu M., Li J., Ludwig A., Kharicha A.: Computational Material Science, 79 (2013) 830–840.
"Modelling diffusion-governed solidification of ternary alloys - Part 1: Coupling solidification kinetics with thermodynamics"

C134. Wu M., Li J., Kharicha A., Ludwig A.: Liquid Metal Processing & Casting Conf. 2013 (LMPC 2013) Sept. 22-25, Austin, Texas (2013) pp. 171-180.
"Using a Three Phase Mixed Columnar-Equiaxed Solidification Model to Study Macrosegregation in Ingot Casting: Perspectives and Limitations"

J92. Li J., Wu M., Hao J., Ludwig A.: Comp. Mater. Sci., 55 (2012) 407-418.
"Simulation of channel segregation using a two-phase columnar solidification model, Part I: Model description and verification”

J91. Li J., Wu M., Hao J., Kharicha A., Ludwig A.: Comp. Mater. Sci., 55 (2012) 419-429.
"Simulation of channel segregation using a two-phase columnar solidification model, Part II: Mechanism and parameter study”

J90. Wu M., Domitner J., Ludwig A.: Metall. Mater. Trans. A, 43(2012) 945-964.
"Using a two-phase columnar solidification model to study the principle of mechanical softreduction in slab casting”

C122. Li J., Wu M., Ludwig A., Kharicha A.: MCWASP XIII (13th Modeling of Casting, Welding and Adv. Solidification Processes) Schladming, Austria, 17-22 June (2012), Eds.: A. Ludwig, M. Wu, A. Kharicha, IOP Conf. Series: Mater. Sci. Eng. 33 (2012) 012091.
"Modelling macrosegregation in a 2.45 ton steel ingot"

C117. Wu, M., Li J., Kharicha A.,  Ludwig A.: ICRF-2012 (1st Int. Conf. on Ingot Casting, Rolling and Forging), Aachen, Germany 3-7 June (2012) CD-ROM proc., 1-10.
"Multiphase modelling of the macrosegregation in ingot castings"

J182. Karimi-Sibaki E., Kharicha A., Abdi M., Vakhrushev A., Wu M., Ludwig A., Bohacek J.: Metall. Mater. Trans. B (2021). DOI: 10/1007/s11663-021-02264-w
"A Numerical Study on the Influence of an AxialMagnetic Field (AMF) on Vacuum Arc Remelting(VAR) Process"

J178. Kharicha A., Karimi-Sibaki E., Vakhrushev A., Wu M., Ludwig A., Bohacek J.: Int. J. Heat and Mass Trans. (2021). DOI: 10.1007/s00231-021-03071-4
"Hydrodynamically enhanced electrochemical mass transferon the surface of an electrically conductive dropet

J171. Karimi-Sibaki E., Kharicha A., Wu M., ludwig A., Bohacek J.: Metall. Mater. Trans. B 51 (2020) 871-879. DOI: 10.1007/s11663-020-01795-y
"A Numerical Investigation on the Electrochemical Behavior of CaO and Al ₂O ₃ in the ESR Slags"

J168. Karimi-Sibaki E., Kharicha A., Vakhrushev A., Wu M., Ludwig A., Bohacek J.: Electrochem. Comm. 112 (2020) 106675. DOI: 10.1016/j.elecom.2020.106675
" A volume of fluid (VOF) method to model shape change during electrodeposition"

J166. Karimi-Sibaki E., Kharicha A., Wu M., Ludwig A., Bohacek J.: Metall. Mater. Trans. B 51 (2020) 222-235. DOI:10.1007/s11663-019-01719-5
"A Parametric Study of the Vacuum Arc Remelting (VAR) Process: Effects of Arc Radius, Side-Arcing, and Gas Cooling"

J165. Karimi-Sibaki E., Kharicha A., Abdi M., Wu M., Ludiwg A., Bohacek J.: J. Electroch. Soc., 166 (2019) D521-D529. DOI: 10.1149/2.1241912jes
"A Dynamic Mesh Method to Model Shape Change during Electrodeposition."

C184. Kharicha A., Karimi-Sibaki E., Wu M., Ludwig A.: Liquid Metal Proc. & Casting Conf. (LMPC2019), Birmingham, UK (2019) pp. 11-16
“Investigations on Collective Motion of Cathode Spots in the VAR Process”

C183. Karimi-Sibaki E., Kharicha A., Wu M., Ludwig A., Bohacek J., Holzgruber H., Ofner B., Scheriau A., Kubin M.: Liquid Metal Proc. & Cast. Conf. (LMPC2019), Birmingham, UK (2019) pp. 55-62
“Numerical Investigation of the Vacuum Arc Remelting (VAR) Process”

C182. Chaulet J., Kharicha A., Dussoubs B., Charmond A., Jardy A., Hans S.: Liquid Metal Proc. & Cast. Conf. (LMPC2019), Birmingham, UK (2019) pp. 107-116
“DNS and Engineering Modeling of the Electroslag Remelting Process”

C181. Karimi-Sibaki E., Kharicha A., Wu M., Ludwig A., Bohacek J.: Liquid Metal Proc. & Cast. Conf. (LMPC2019), Birmingham, UK (2019) pp. 131-138
“Modeling Electrochemical Transport of Ions in the ESR Process”

N33. Kharicha A., Karimi-Sibaki E., Wu M., Ludwig A.: Electrochemical Conf. on Energy and Environment: Bioelectrochem. and Energy Storage 2019 (ECEE 2019), Glasgow, Schottland
"Diffusion-Reaction-Limited Mass Transfer on the Surface of an Electrically Conductive Droplet"

J153. Karimi-Sibaki E., Kharicha A., Wu M., Ludwig A., Bohacek J.: J. Electroch. Soc., 165 (2018) E604-E615. DOI:10.1149/2.1201811jes
"Contribution of an Electro-Vortex Flow to Primary, Secondary and Tertiary Electric Current Distribution in an Electrolyte"

J145. Karimi-Sibaki E., Kharicha A., Wu M., Ludwig A., Bohacek J.: Ionics 24 (2018) 2157-2165. DOI: 10.1007/s11581-018-2460-3
"Confrontation of the Ohmic approach for with the ionic transport approach for modeling the electrical behavior of an electrolyte"

J144. Karimi-Sibaki E., Kharicha A., Wu M., Ludwig A., Bohacek J.: Appl. Math. 357 (2018) 357-373. DOI: 10.1016/j.amc.2018.01.008
"Modeling electrochemical transport of ions in the molten CaF2 –FeO slag operating under a DC voltage"

J143. Kharicha A., Karimi-Sibaki E., Wu M., Ludwig A., Bohacek J.: Steel Res. Int. 89 (2018) 1700100 1-20. D OI: 10.1002/srin.201700100
"Review on Modeling and Simulation of Electroslag Remelting"

J142. Karimi-Sibaki E., Kharicha A., Wu M., Ludwig A., Bohacek J., Holzgruber H., Ofner B., Scheriau A., Kubin M.: Appl. Thermal Eng. 130 (2018) 1062–1069.
DOI: 10.1016/j.applthermaleng.2017.11.100
"A multiphysics model of the electroslag rapid remelting (ESRR) process"

J137. Karimi-Sibaki E., Kharicha A., Wu M., Ludwig A., Bohacek J.: Steel Res. Int. 88 No. 5 (2017) 1700011 (1-8).
"Toward Modeling of Electrochemical Reactions during Electroslag Remelting (ESR) Process"

C165. Karimi-Sibaki E., Kharicha A., Wu M., Ludwig A., Holzgruber H., Ofner B., Scheriau A., Kubin M., Ramprecht M.: Liquid Metal Processing & Casting Conf. (LMPC-16) (2017) pp. 231-233.
"CFD Modeling of the Electroslag Rapid Remelting (ESRR) Process"

C164. Karimi-Sibaki E., Kharicha A., Wu M., Ludwig A., Holzgruber H., Ofner B., Scheriau A., Kubin M., Ramprecht M.: Liquid Metal Processing & Casting Conf. (LMPC-16) (2017) pp. 213-216.
"CFD Modeling of the Electrode Change During the ESR Process"

J127. Kharicha A, Wu M., Ludwig A., Karimi-Sibaki: Metall. Mater. Trans. B, 47 (2016) 1427-34.
"Simulation of the Electrical Signal During the Formation and Departure of Droplets in the Electro Slag Remelting Process"

J126. Karimi-Sibaki E., Kharicha A., Bohacek J., Wu M., Ludwig A.: Adv. Eng. Mater. 18 (2016) 224-30.
"On Validity of Axisymmetric Assumption for Modeling an Industrial Scale Electroslag Remelting Process"

C151. Karimi-Sibaki E., Kharicha A., Wu M., Ludwig A.: IOP Conf. Series: Materials Science and Engineering (LMPC-15) 143 (2016) 012008.
"A numerical study on electrochemical transport of ions in calcium fluoride slag"

C150. Kharicha A., Karimi-Sibaki E., Bohacek J., Wu M., Ludwig A.: IOP Conf. Series: Materials Science and Engineering (LMPC-15) 143 (2016) 012003.
"Transient melting of an ESR electrode"

C149. Karimi-Sibaki E., Kharicha A., Wu M., Ludwig A., Holzgruber H, Ofner B., Scheriauc A., Kubin M., Ramprecht M.: M.: IOP Conf. Series: Materials Science and Engineering (LMPC-15) 143 (2016) 012006.
"An attempt to model electrode change during the ESR process"

J121. Karimi-Sibaki E., Kharicha A., Bohacek J., Wu M., LUDWIG A.: Metall. Mater. Trans. A, (2015) published online
"A Dynamic Mesh-Based Approach to Model Meltingand Shape of an ESR Electrode"

J118. Kharicha A., Teplyakov I., Ivochkin Yu., Wu M., Ludwig A., Guseva A.: Exp. Therm. Fluid Sci. 62 (2015) 192-201.
"Experimental and numerical analysis of free surface deformationin an electrically driven flow"

J113. Kharicha A., Ludwig A., Wu M.: ISIJ Int., 54 (2014) 1621-1628.
"On Melting of Electrodes during Electro-Slag Remelting"

J110. Karimi-Sibaki E., Kharicha A., Wu M., Ludwig A., Korp J.: Mater. Sci. Forum, 790-791 (2014) 396-401.
"Influence of crystal morphological parameters on the solidification of ESR ingot"

C139. Karimi Sibaki E., Kharicha A., Wu M., Ludwig A., Holzgruber H., Ofner B., Ramprecht M.: 2nd Int. Conf. Ingot Casting Rolling Forging, Milano, Italy, May 7-9 (2014) on data storage device.
"A parameter study on the effect of slag electrode conductivity on the solidification of a large scale ESR ingot"

C138. Kharicha A., Karimi Sibaki E., Wu M., Ludwig A.: 2nd Int. Conf. Ingot Casting Rolling Forging, Milano, Italy, May 7-9 (2014) on data storage device.
"How to get a smooth ESR Ingot surface?"

C135. Kharicha A., Wu M., Ludwig A.: 8th Int. Conf. Multiphase Flow (ICMF 2013), May 26-31, Jeju, Korea, (2013) No. 829.
"MHD and multiphase phenomena in an industrial scale electro-slag remelting process"

C133. Karimi-Sibaki E., Kharicha A., Wu M., Ludwig A., Holzgruber H., Ofner B., Ramprecht M.: Liquid Metal Processing & Casting Conf. 2013 (LMPC 2013) Sept. 22-25, Austin, Texas (2013) pp. 13-19.
"A Numerical Study on the Influence of the Frequency of the Applied AC Current on the Electroslag Remelting Process"

C132. Kharicha A., Wu M., Ludwig A.: Liquid Metal Processing & Casting Conf. 2013 (LMPC 2013) Sept. 22-25, Austin, Texas (2013) pp. 145-150.
"Variation of the Resistance During the Electrode Movement in the Electroslag Remelting Process"

C131. Kharicha A., Karimi Sibaki E., Wu M., Ludwig A.: Liquid Metal Processing & Casting Conf. 2013 (LMPC 2013) Sept. 22-25, Austin, Texas (2013) pp. 95-99.
"Contribution of the Mould Current to the Ingot Surface quality in the Electroslag Remelting Process"

B19. Kharicha, A., Wu, M., Ludwig, A., Ramprecht, M., Holzgruber, H.: in "CFD Modeling and Simulation in Materials Processing", ISBN 978-1-11829-615-8, Eds.: Nastac L. et al, Wiley, Hoboken, New Jersey, (2012) 139-46.
"Influence of the frequency of the applied AC current on the electroslag remelting process."

C127. Kharicha A., Körp J., Kubin M., Wu M., Ludwig A.: CLEANSTEEL8, Budapest, Hungary, 14-16 Mai 2012, pp 145-157.
"Investigations on the origin of radial distribution of non-metallic inclusions in ESR ingot"

J170. Mogeritsch J., Abdi M., Ludwig A.: Materials 13 (2020) 966:1-16. DOI:10.3390/ma13040966
"Investigation of Peritectic Solidification Morphologies by Using the Binary Organic Model System TRIS-NPG"

C178. Mogeritsch J.P., Pfeifer T., Ludwig A.: 5th Int. Conf. Adv. Solid. Proc. (ICASP-5) combined with 5th Int. Symp. Cutting Edge of Comp. Sim. of Solid., Cast. and Refining,Salzburg, Austria, IOP Conf. Series: Mater. Sci. & Eng., 529 (2019) 012025 .
"Formation of micro-plumes at a planar solid liquid interface in a temperature gradient"

N32. Mogeritsch P.J., Bottger B., Ludwig A.: International Conference Researchfora, Miami 23.-24. July 2019
"Calibration of Numerical and Determination of Physical Parameters for the Organic Model System TRIS-NPG."

J155. Mogeritsch J., Ludwig A.: Res. & Dev. Materials Sci. 4 (2018) 1-3. DOI:10.31031/RDMS.2018.04.000580
"Investigation on Peritectic Layered Structures by Using the Binary Organic Components TRIS-NPG as Model Substances for Metal-Like Solidification"

C171. Mogeritsch J.P., Ludwig A.: 7th Int. Conf. Solidification and Gravity (SG 2018), Miskolc, Hungary, pp. 330-335.DOI: 10.31031/RDMS.2018.,4.000580
"Investigation on the Binary Organic Components TRIS-NPG as Suitable Model Substances for Metal-Like Solidification"

C170. Mogeritsch J.P., Pfeifer T., Stefan-Kharicha M., Ludwig A.: 7th Int. Conf. Solidification and Gravity (SG 2018), Miskolc, Hungary, pp. 319-324.
"Investigation on the Liquid Flow ahead of the Solidification Front During the Formation of Peritectic Layered Solidification Structures"

J135. Ludwig A., Mogeritsch J., Pfeifer T.: Acta Mater. 126 (2017) 329-35.
"In-situ observation of coupled peritectic growth in a binary organicmodel alloy"

C161. Mogeritsch J.P., Ludwig A., Böttger B., Angeli G., Riener C.K., Ebner R.: VII Int. Conf. Coupled Problems Science and Engineering (2017) pp. 1171-1182.
"Phase-field modelling of ternary eutectic solidification in hot dip galvanization"

J133. Ludwig A., Mogeritsch J.: J. Crystal Growth 455 (2016) 99–104.
"Compact seaweed growth of peritectic phase on confined, flat properitectic dendrites"

C155. Kharicha A., Pfeiler C., Bohacek J., Ludwig A., Wu M., Mogeritsch J., Angeli G., Riener C.K.: 8th Int. Conf. Thermal Engineering: Theory and Applications, May 18-21, 2015, Amman-Jordan, on data storage device
"A shallow layer model predicting the zinc film thickness during the continuous hot-dip galvanizing process"

C142. Mogeritsch J.P., Ludwig A.: MCWASP XIV (14th Modeling of Casting, Welding and Adv. Solidification Processes) Awaji island, Hyogo, Japan, 21-26 June (2015), Ed.: H. Yasuda, IOP Conf. Series: Materials Science and Engineering 84 (2015) 012055
"In-situ observation of the dynamic of peritectic coupled growth using the binary organic system TRIS-NPG"

J111. Ludwig A., Mogeritsch J.: Mater. Sci. Forum, 790-791 (2014) 317-322.
"Recurring instability of cellular growth in a near peritectic transparent NPG-TRIS alloy system"

J95. Ludwig A., Mogeritsch J., Kolbe M., Gerhard Z., Sturz L., Bergeon N., Faivre G., Billia B., Akamatsu S., Bottin-Rousseau S., Voss D.: JOM 64 (2012) 1097-101.
"Adv. Solidification Studies on Transparent Alloy Systems: A New European Solidification Insert for Material Science Glovebox on Board the Int. Space Station"

C115. Mogeritsch J, Ludwig A.: TMS Annual Meeting, Symp. on "Materials Research in Microgravity" (NASA/CP-2012-217466), (2012) 48-55.
"Microstructure formation in the two phase region of the binary peritectic organic system TRIS-NPG"

B16. Ludwig A., Mogeritsch J.: in "Solidification Science and Technology: Proceedings of the John Hunt International Symposium", ISBN 978-1-902316-99-4,  Eds.: Fan Z., Stones I.C., Brunel University Press, (2011) 233-42.
"In-situ Observation of Coupled Peritectic Growth"

J184. Vakhrushev A., Kharicha A., Wu M., Ludwig A., Tang Y., Hackl G., Nitzl G., Watzinger J., Bohacek J.: Metals 11 (2021) 1375 1-20. DOI: 10.3390/met11091375
"On Modelling Parasitic Solidification Due to Heat Loss at Submerged Entry Nozzle Region of Continuous Casting Mold"

J181. Vakhrushev A., Kharicha A., Karimi-Sibaki E., Wu M., Ludwig A., Nitzl G., Tang Y., Hackl G., Watzinger J., Eckert S.: Metall. Mater. Trans. B (2021). DOI: 10.1007/511663-021-02247-x
"Generation of Reverse Meniscus Flow by ApplyingAn Electromagnetic Brake"

J174. Vakhrushev A., Kahricha A., Liu Z., Wu M., Ludwig A., Nitzl G. tang Y., Hackl G., Watzinger J.: Metall. Mater. Trans. B (2020) 2811-2828. DOI:10.1007/s11663-020-01952-3
"Electric Current Distribution During Electromagnetic Braking in Continuous Casting"

C185. Vakhrushev A., Kharicha A., Wu M., Ludwig A., Nitzl G., Tang Y., Hackl G., Watzinger J., Rodrigues C.: MCWASP XV, IOP Conf. Series: Mater. Sci. Eng. 861 (2020) 012015. DOI: 10.1088/1757-899X/861/1/012015
"Modelling viscoplastic behavior of solidifying shell under applied electromagnetic breaking during continuous casting"

J163. Liu Z., Li B., Vakhrushev A., Wu M., Ludwig A.: Steel Research int. 90 (2019) 18020117 1-10. DOI: 10.1002/srin.201800117
"Physical and Numerical Modeling of Exposed Slag Eye in Continuous Casting Mold using Euler-Euler Approach"

J159. Liu Z., Vakhrushev A., Wu M., Kharicha A., Ludwig A., Li B.: Metall. Mater. Trans. B 50 (2019) 543-554. DOI: 10.1007/s11663-018-1443-0
"Scale-Adaptive Simulation of Transient Two-Phase Flow in Continuous-Casting Mold"

C180. Vakhrushev A., Kharicha A., Liu Z., Wu M., Ludwig A., Nitzl G., Tang Y., Hackl G., Watzinger J.: 8th Int. Conf. on Mod. & Simul. of Metall. Processes in Steelmaking (STEELSIM2019), Toronto, Canada (2019) pp. 615-619 DOI: 10.33313/503/064
"Optimizing the flow conditions in the thin-slab casting mold using electromagnetic brake"

C175. Vakhrushev A., Kharicha A., Wu M., Ludwig A., Nitzl G., Tang Y., Hackl G., Watzinger J., Rodrigues C.: 5th Int. Conf. on Adv. Solid. Proc. (ICASP-5) combined with 5th Int. Symp. on Cutting Edge of Comp. Sim. of Solid., Cast. and Refining, Salzburg, Austria, IOP Conf. Series: Mater. Sci. & Eng., 529 (2019) 012081.DOI:10.1088/1757-899X/529/1/012081
"On modelling viscoplastic behaviour of the solidifying shell in the funnel-type continuous casting mold"

C174. Vakhrushev A., Kharicha A., Ludwig A., Nitzl G., Tang Y., Hackl G., Watzinger J.: Solidification: computer simulation, experiments and technology 2019. Ischewsk, Russia, 85-87.
"On modelling parasitic solidification due to heat loss at submerged entry nozzle region of continuous casting mold."

J154. Liu Z., Vakhrushev A., Wu M., Karimi-Sibaki E., Kharicha A., Ludwig A., Li B.: Metals 8 (2018) 609:1-4. DOI:10.3390/met8080609
"Effect of an Electrically-Conducting Wall on Transient Magnetohydrodynamic Flow in a Continuous-Casting Mold with an Electromagnetic Brake"

C167. Liu Z., Vakhrushev A., Wu M., Ludwig A., Li B., Xu G.: 7th Int. Congr. on Sci. and Techn. of Steel Making (ICS2018), Venice, Italy, 43.
"Numerical Modelling of Bubbly Flow in Continuous Casting Mold using Two Population Balance Approaches"

C166. Vakhrushev A., Liu Z., Wu M., Kharicha A., Ludwig A., Nitzl G., Tang Y., Hackl G.: 7th Int. Congr. on Sci. and Techn. of Steel Making (ICS2018), Venice, Italy, 159.
"Numerical Modelling of the MHD flow in continuous casting mold by two CFD platforms ANSYS Fluent and OpenFOAM"

C158. Wu M., Vakhrushev A., Ludwig A., Kharicha A.: IOP Conf. Series: Materials Science and Engineering (ICASP-4) 117 (2016) 012045
"Influence of forced convection on solidification and remelting in the developing mushy zone"

J106. Vakhrushev A., Wu M., Ludwig A., Tang Y., Hackl G., Nitzl G.: Metall. Mater. Trans. B., 45 (2014) 1024-37.
“Numerical investigation of shell formation in thin slab casting of funnel-type mould”

C137. Vakhrushev A., Ludwig A., Wu M.: 8th European Continuous Casting Conf., Graz, Austria, June 23-26 (2014) on data storage device.
"Experimental verification of the 3-phase continuous casting simulation using a water model"

C129. Vakhrushev A., Ludwig A., Wu M., Tang Y., Nitzl G., Hackl G.: 5th Conf. "STEELSIM 2013", Ostrava, CZ
"Discrete Phase Modelling for Continuous Casting: Model Verification and Application

C119. Vakhrushev A., Wu M., Ludwig A., Tang Y., Hackl G., Nitzl G.: MCWASP XIII (13th Modeling of Casting, Welding and Adv. Solidification Processes) Schladming, Austria, 17-22 June (2012), Eds.: A. Ludwig, M. Wu, A. Kharicha, IOP Conf. Series: Mater. Sci. Eng. 33 (2012) 012014.
"Modeling of the flow-solidification interaction in thin slab casting"

C116. Vakhrushev A., Ludwig A., Wu M., Tang Y., Hackl G., Nitzl G.: Open Source CFD Int. Conf., London, UK, Oct. 29-30 (2012) 1-18.
"Advanced Multiphase Modeling of Solidification with OpenFOAM"

J177. Wu M., Stefan-Kharicha M., Kharicha A., Ludwig A.: Int. J. Heat and Mass Trans. 164 (2021) 120566. DOI: 10.1016/j.ijheatmasstransfer.2020.120566
"Flow-solidification interaction: A numerical study on solidification of NH 4 Cl –70 wt.%H 2 O solution in a water-cooled mould with a large sample thickness"

C187. Wu M., Stefan-Kharicha M., Kharicha A., Ludwig A.: MCWASP XV, IOP Conf. Series: Mater. Sci. Eng. 861 (2020) 012041. DOI: 10.1088/1757-899X/861/1/012041
"Numerical investigation of an in-situ observed flow regimes during solidification of an NH ₄Cl - 70wt%H ₂O solution"

J158. Stefan-Kharicha M., Kharicha A., Mogeritsch J., Wu M., Ludwig A.: J. Chem. Eng. Data 63 (2018) 3170−3183. DOI: 10.1021/acs.jced.7b01062
"Review of ammonium chloride-water solution properties"

J151. Stefan-Kharicha M., Kharicha A., Wu M., Ludwig A.: Metall. Mater.Trans. A, 49 (2018) 1708-1724. DOI: 10.1007/s11661-018-4489-3
"On the Coupling Mechanism of Equiaxed Crystal Generation with the Liquid Flow Driven by Natural Convection During Solidification"

J136. Ludwig A., Stefan-Kharicha M., Kharicha A., Wu M.: Metall. Mater. Trans. A, 48 (2017) 2927-31.
"Massive formation of equiaxed crystals by avalanches of mushy zone segments"

J116. Stefan-Kharicha M., Kharicha A., Wu M., Ludwig A.: Fluid Dyn. Res. 46 (2014) 041424.
"Observation of flow regimes and transitions during a columnar solidification experiment"

J108. Ahmadein M., Wu M., Stefan-Kharicha M., Kharicha A., Ludwig A.: Mater. Sci. Forum, 790-791 (2014) 247-52.
"Evaluation of a 5-phase mixed columnar-equiaxed solidification model with a benchmark solidification experiment of NH4Cl-H2O solution"

J99. Kharicha A., Stefan-Kharicha M., Ludwig A., Wu M.: Metall. Mater. Trans. A, 44 (2013) 661-668.
"Simultaneous observation of melt flow and motion of equiaxed crystals during solidification using a dual phase Particle Image Velocimetry technique. Part II: Relative velocities"

J98. Kharicha A., Stefan-Kharicha M., Ludwig A., Wu M.:  Metall. Mater. Trans. A, 44 (2013) 650-660.
"Simultaneous observation of melt flow and motion of equiaxed crystals during solidification using a dual phase Particle Image Velocimetry technique. Part I:   Stages characterization of melt flow and equiaxed crystals motion"

C123. Kharicha A., Stefan-Kharicha M., Ludwig A., Wu M.: MCWASP XIII (13th Modeling of Casting, Welding and Adv. Solidification Processes) Schladming, Austria, 17-22 June (2012), Eds.: A. Ludwig, M. Wu, A. Kharicha, IOP Conf. Series: Mater. Sci. Eng. 33 (2012) 012042.
"Simultaneous observation of melt flow and motion of equiaxed crystals during solidification using a dual phase PIV technique"

J183. Rodrigues C., Wu M., Zhang H., Ludwig A., Kharicha A.: Metall. Mater. Trans. A (2021). DOI: 10.1007/s11661-021-06414-2
Bridging Capillary-Driven Fragmentation and GrainTransport with Mixed Columnar-Equiaxed Solidification"

C186. Zhang Z., Wu M., Zhang H., Karimi-Sibaki E., Ludwig A., Kharicha A.: MCWASP XV, IOP Conf. Series: Mater. Sci. Eng. 861 (2020) 012024. DOI:10.1088/1757-899X/861/1/012024
"Modeling mixed columnar-equiaxed solificiation of Sn-10wt% alloy under forced convection driven by travelling magnetic stirring"

J149. Zheng Y., Wu M., Karimi-Sibaki E., Kharicha A., Ludwig A.: Int. J. Heat and Mass Trans. 122 (2018) 939–953. DOI: 10.1016/j.ijheatmasstransfer.2018.02.012
"Use of a mixed columnar-equiaxed solidification model to analyse the formation of as-cast structure and macrosegregation in a Sn-10 wt% Pb benchmark experiment"

C162. Zheng Y., Wu M., Kharicha A., Ludwig A.: 6th Decennial Int. Conf. Solidification Processing (2017) pp. 312-316.
"Volume Average Modelling of Equiaxed-to-Columnar Transition in a Vertically Solidified Pb-18 wt.%Sn Cavity"

J130. Li Jun, Ge H., Wu M., Ludwig A., Li Jianguo: Acta Metallurgica Sinica 52 (2016) 1096-1104.
"A columnar & non-globular equiaxed mixed three-phase model based on thermosolutal convection and grain movement"

J119. Ahmadein M., Wu M., Ludwig A.: J. Crystal Growth 417 (2015) 65-74.
"Analysis of macrosegregation formation and columnar-to-equiaxed transition during solidification of Al-4wt.%Cu ingot using a 5-phase model"

C144. Sturz L., Wu M., Zimmermann G., Ludwig A.,Ahmadein M.: MCWASP XIV (14th Modeling of Casting, Welding and Adv. Solidification Processes) Awaji island, Hyogo, Japan, 21-26 June (2015), Ed.: H. Yasuda, IOP Conf. Series: Materials Science and Engineering 84 (2015) 012086
"Benchmark experiments and numerical modelling of the columnar-equiaxed dendritic growth in the transparent alloy Neopentylglycol-(d)Camphor"

C143. Hao J., Lin Y.J., Nie Y., Wu M., Ludwig A.: MCWASP XIV (14th Modeling of Casting, Welding and Adv. Solidification Processes) Awaji island, Hyogo, Japan, 21-26 June (2015), Ed.: H. Yasuda, IOP Conf. Series: Materials Science and Engineering 84 (2015) 012061
"Modelling of macrosegregation in direct chill casting considering columnar-to-equiaxed transition using 3-phase Eulerian approach"

J108. Ahmadein M., Wu M., Stefan-Kharicha M., Kharicha A., Ludwig A.: Mater. Sci. Forum, 790-791 (2014) 247-52.
"Evaluation of a 5-phase mixed columnar-equiaxed solidification model with a benchmark solidification experiment of NH4Cl-H2O solution"

J103. Li J., Wu M., Ludwig A., Kharicha A.: Int. J. Heat and Mass Transfer 72 (2014) 668-679.
"Simulation of Macrosegregation in a 2.45-ton Steel Ingot Using a Three-Phase Mixed Columnar-Equiaxed Model"

C134. Wu M., Li J., Kharicha A., Ludwig A.: Liquid Metal Processing & Casting Conf. 2013 (LMPC 2013) Sept. 22-25, Austin, Texas (2013) pp. 171-180.
"Using a Three Phase Mixed Columnar-Equiaxed Solidification Model to Study Macrosegregation in Ingot Casting: Perspectives and Limitations"

J152. Bohacek J., Kharicha A., Ludwig A., Wu M., Karimi-Sibaki E.: Metall. Mater. Trans. B 49 (2018) 1421-1433. DOI: 10.1007/s11663-018-1220-0
"Heat Transfer Coefficient at Cast-Mold Interface During Centrifugal Casting: Calculation of Air Gap"

J141. Bohacek J., Kharicha A., Ludwig A., Wu M., Karimi-Sibaki E., Paar A., Brandner M., Elizondo L., Trickl T.: Appl. Math. Comput. 319 (2018) 301-317.
DOI: 10.1016/j.amc.2017.03.030
"A (non-)hydrostatic free-surface numerical model for two-layer flows"

C154. Bohacek J., Kharicha A., Ludwig A., Wu M., Paar A., Brandner M., Elizondo L., Trickl T.: IOP Conf. Series: Materials Science and Engineering (LMPC-15) 143 (2016) 012036.
"Free-surface flow in horizontally rotating cylinder: experiment and simulation"

J125. A. Kharicha, J. Bohacek,  A. Ludwig, M. Wu: J. Fluids Engineering 137 (2015) 1111505/1-10.
"Modified shallow water equations with application for horizontal centrifugal casting of rolls"

J124. J. Bohacek, A. Kharicha, A. Ludwig, M. Wu: Appl. Math. Comp., 267 (2015) 179-194.
“An approximate Riemann solver for shallow water equations and heat advection in horizontal centrifugal casting”

C147. Bohacek J., Kharicha A., Ludwig A., Wu M. , Paar A., Brandner M., Elizondo L., Trickl T.: 6th. Int. Conf. "SteelSim 2015", Bordolino, Italy, on data storage device.
"An approximate Riemann solver for two layer shallow water equations in horizontal centrifugal casting"

J105. Bohacek J., Kharicha A., Ludwig A., Wu. M.: ISIJ International, 54 (2014) 266-274.
"Simulation of Horizontal Centrifugal Casting: Mold filling and Solidification"

C130. Bohacek J., Ludwig A., Kharicha A.: 5th Conf. "STEELSIM 2013", Sept. 10-12, 2013, Ostrava, CZ
"Numerical study of horizontal centrifugal casting of HSS work roll"

B17. Kharicha, A., Bohacek, J., Ludwig, A., Wu, M.: in "CFD Modeling and Simulation in Materials Processing", ISBN 978-1-11829-615-8, Eds.: Nastac L. et al, Wiley, Hoboken, New Jersey, (2012) 227-34.
"Vibration induced flow in a horizontal centrifugal casting"

C120. Bohacek J., Kharicha A., Ludwig A., Wu M.: MCWASP XIII (13th Modeling of Casting, Welding and Adv. Solidification Processes) Schladming, Austria, 17-22 June (2012), Eds.: A. Ludwig, M. Wu, A. Kharicha, IOP Conf. Series: Mater. Sci. Eng. 33 (2012) 012032.
"Shallow Water Model for Horizontal Centrifugal Casting"

J180. Zhang H., Wu M., Rodrigues C., Ludwig A., Kharicha A.: Metall. Mater. Trans A (2021). DOI: 10.1007/s11661-021-06295-5
"Directional Solidification of AlSi7Fe1 Alloy UnderForced Flow Conditions: Effect of Intermetallic PhasePrecipitation and Dendrite Coarsening"

J176. Zhang H., Wu M., Tewari S.N., Ludwig A., Kharicha A.: J. Mat. Proc. Tech. 288 (2021) 116913. DOI: 10.1016/j.jmatprotec.2020.116913
"Geometrical effect on macrosegregation formation during unidirectional solidification of Al–Si alloy"

J156. Zhang H., Wu M., Zheng Y., Ludwig A., Kharicha A.: Trans. Indian Inst. Met. 71 (2018) 2639–2643. DOI:10.1007/s12666-018-1422-9
"Macrosegregation Formation in an Al-Si Casting Sample with Cross-sectional Change During Directional Solidification"

C159. Ludwig A., Holzmann T.: IOP Conf. Series: Materials Science and Engineering (MPPE) 119 (2016) 012026.
"Automatic optimization of localized heat treatment for Al-Si-Mg alloys"

C156. Ahmadein M., Wu M., Reinhart G., Nguyen-Thi H., Ludwig A.: IOP Conf. Series: Materials Science and Engineering (ICASP-4) 117 (2016) 012010
"Modelling Al-4wt.%Cu as-cast structure using equiaxed morphological parameters deduced from in-situ synchrotron X-ray radiography"

J119. Ahmadein M., Wu M., Ludwig A.: J. Crystal Growth 417 (2015) 65-74.
"Analysis of macrosegregation formation and columnar-to-equiaxed transition during solidification of Al-4wt.%Cu ingot using a 5-phase model"

109. Ahmadein M., Wu M., Schumacher P., Ludwig A.: Mater. Sci. Forum, 790-791 (2014) 67-72.
"A numerical study of the influence of pouring technique on the as-cast structure of Al-Cu ingots"

J100. Ahmadein M., Wu M., Li J., Schumacher P., Ludwig A.: Metall. Mater. Trans. A, 44 (2013) 2895-2903.
"Prediction of the As-Cast Structure of Al-4.0 wt. pct Cu Ingots"

C126. Unterreiter G., Ludwig A., Wu M., Vakhrushev A., Ishmurzin A.: Conference on Materials and Technology, Portoroz, Slovenia, 17-19 October (2012).
"Simulation of the Casting and Quenching Process of a Laboratory AlSi7MgCu05 Casting"

C125. Ahmadein M., Wu M., Ludwig A.: ICET2012 (Int. Conf. on Engineering Technology) New Cairo City, Egypt., 10-11. Oct. (2012) 1-6.
"Numerical study of the influence of mold filling conditions on the as-cast structure of Al-4 wt.%Cu ingots"

C124. Wu M., Ahmadein M., Kharicha A., Ludwig A., Li J.H., Schumacher P.: MCWASP XIII (13th Modeling of Casting, Welding and Adv. Solidification Processes) Schladming, Austria, 17-22 June (2012), Eds.: A. Ludwig, M. Wu, A. Kharicha, IOP Conf. Series: Mater. Sci. Eng. 33 (2012) 012075.
"Simulation of the as-cast structure of Al-4.0wt.%Cu ingots with a 5-phase mixed columnar-equiaxed solidification model"

C128. Kemminger A., Ludwig A.: European Metallurgy Conference 2013 (EMC2013), June 23-26, Weimar, Germany (2013) pp. 795-806.
"Modelling the Electrolyte Flow in a Full-Scale Copper Electrorefining Tankhouse Cell"

J94. Ludwig A., Grasser M., Schillinger W.: World of Metallurgy, 65 (2012) 117-25.
"Experimental investigation on the ternary phase diagram Cu-Sn-P"

J93. Grasser M., Ludwig A., Schillinger W.: Int. J. Materials Research, 103 (2012) E1–7.
"Thermodynamic description of the system Cu-Sn-P: experimental and numerical invigation"