Header Bild

CHAIR OF SIMULATION AND MODELING METALLURGICAL PROCESSES

Publications

For a copy of any article, please send an e-mail request to: smmp(at)unileoben.ac.at

Some papers can be viewed on-line by clicking on the highlighted link. However, all papers are copyrighted by either a publisher or Prof. Ludwig himself and thus all rights of reproduction or distribution in any form are reserved.

Journal Publications (2018-2020)

J176. Wu M., Stefan-Kharicha M., Kharicha A., Ludwig A.: Int. J. Heat and Mass Trans. 164 (2021) 120566 DOI: 10.1016/j.ijheatmasstransfer.2020.120566
"Flow-solidification interaction: A numerical study on solidification of NH 4 Cl –70 wt.%H 2 O solution in a water-cooled mould with a large sample thickness"

J175. Zhang H., Wu M., Tewari S.N., Ludwig A., Kharicha A.: J. Mat. Proc. Tech. 288 (2021) 116913 DOI: 10.1016/j.jmatprotec.2020.116913
"Geometrical effect on macrosegregation formation during unidirectional solidification of Al–Si alloy"

J174. Vakhrushev A., Kahricha A., Liu Z., Wu M., Ludwig A., Nitzl G. tang Y., Hackl G., Watzinger J.: Metall. Mater. Trans. B (2020) 2811-2828 DOI:10.1007/s11663-020-01952-3
"Electric Current Distribution During Electromagnetic Braking in Continuous Casting"

J173. Rodrigues C., Ludwig A., Wu M., Kharicha A., Vakhrushev A.: J. Mat. Proc. Tech. 286 (2020) DOI:10.1016/j.jmatprotec.2020.116814
"Two-phase vicoplastic model for the simulation of twin roll casting"

J172. Stefan-Kharicha M., Kharicha A., Zaidat K., Reiss G., Eßl W., Goodwin F., Wu M., Ludwig A., Mugrauer C.: J. Crystal Groth. 541 (2020) DOI: 10.1016/j.jcrysgro.2020.125667
"Impact of hydrodynamics on growth and morphology of faceted crystals"

J171. Karimi-Sibaki E., Kharicha A., Wu M., ludwig A., Bohacek J.: Metall. Mater. Trans. B 51 (2020) 871-879 DOI: 10.1007/s11663-020-01795-y
"A Numerical Investigation on the Electrochemical Behavior of CaO and Al 2O 3 in the ESR Slags"

J170. Mogeritsch J., Abdi M., Ludwig A.: Materials 13 (2020) 966:1-16 DOI:10.3390/ma13040966
"Investigation of Peritectic Solidification Morphologies by Using the Binary Organic Model System TRIS-NPG"

J169. Chaulet J., Kharicha A., Charmond S., Dussoubs B., Hans S., Wu M., Ludwig A., Jardy A.: Metals 10 (2020) 490:1-16 DOI: 10.3390/met10040490
"A 2D Multiphase Model of Drop Behavior during Electroslag Remelting"

J168. Karimi-Sibaki E., Kharicha A., Vakhrushev A., Wu M., Ludwig A., Bohacek J.: Electrochem. Comm. 112 (2020) 106675 DOI: 10.1016/j.elecom.2020.106675
" A volume of fluid (VOF) method to model shape change during electrodeposition"

J167. Zhang H., Wu M., Zhang Y., Ludwig A., Kharicha A.: Mat. Today Comm. 22 (2020) 100842 DOI: 10.1016/j.mtcomm.2019.100842
"Numerical study of the role of mush permeability in the solidifying mushy zone under forced convection"

J166. Karimi-Sibaki E., Kharicha A., Wu M., Ludwig A., Bohacek J.: Metall. Mater. Trans. B 51 (2020) 222-235. DOI:10.1007/s11663-019-01719-5
"A Parametric Study of the Vacuum Arc Remelting (VAR) Process: Effects of Arc Radius, Side-Arcing, and Gas Cooling"

J165. Karimi-Sibaki E., Kharicha A., Abdi M., Wu M., Ludiwg A., Bohacek J.: J. Electroch. Soc., 166 (2019) D521-D529. DOI: 10.1149/2.1241912jes
"A Dynamic Mesh Method to Model Shape Change during Electrodeposition."


J164. Wu M., Ludwig A., Kharicha A.: Metals 9 (2019) 229 1-43. DOI: 10.3390/met9020229
"Volume-Averaged Modeling of Multiphase Flow Phenomena during Alloy Solidification"

J163. Liu Z., Li B., Vakhrushev A., Wu M., Ludwig A.: Steel Research int. 90 (2019) 18020117 1-10. DOI: 10.1002/srin.201800117
"Physical and Numerical Modeling of Exposed Slag Eye in Continuous Casting Mold using Euler-Euler Approach"

J162. Liu Z., Li B., Wu M., Xu G., Ruan X., Ludwig A.: The Minerals, Met. & Mater. Soci ASM Int. 50A (2019) 1370-1379. DOI: 10.1007/s11661-018-5079-0
"An Experimental Benchmark of Non-metallic Inclusion Distribution Inside a Haavy Continuous-Casting Slab"

J161. Barati H., Kharicha A., Wu M., Ludwig A.: Metall. Mater. Trans. B 50 (2019) 1428-1443. DOI: 10.1007/s11663-019-01551-x
"Calculation Accuracy and Efficiency of a Transient Model for Submerged Entry Nozzle Clogging"

J160. Rodrigues C., Ludwig A., Wu M., Kharicha A., Vakhrushev A.: Metall. Mater. Trans. B 50 (2019)  1334-1350. DOI: 10.1007/s11663-019-01527-x
"A Comprehensive Analysis of Macrosegregation Formation During Twin- Roll Casting"

J159. Liu Z., Vakhrushev A., Wu M., Kharicha A., Ludwig A., Li B.: Metall. Mater. Trans. B 50 (2019) 543-554. DOI: 10.1007/s11663-018-1443-0
"Scale-Adaptive Simulation of Transient Two-Phase Flow in Continuous-Casting Mold"

J158. Stefan-Kharicha M., Kharicha A., Mogeritsch J., Wu M., Ludwig A.: J. Chem. Eng. Data 63 (2018) 3170−3183. DOI: 10.1021/acs.jced.7b01062
"Review of ammonium chloride-water solution properties"

J157. Rodrigues C., Ludwig A., Kharicha A., Wu M.: Trans. Indian Inst. Met. 71 (2018) 2645-2649. DOI: 10.1007/s12666-018-1423-8
"Modeling of the Twin-Roll casting Process: Transition from Casting to Rolling"

J156. Zhang H., Wu M., Zheng Y., Ludwig A., Kharicha A.: Trans. Indian Inst. Met. 71 (2018) 2639–2643. DOI:10.1007/s12666-018-1422-9
"Macrosegregation Formation in an Al-Si Casting Sample with Cross-sectional Change During Directional Solidification"

J155. Mogeritsch J., Ludwig A.: Res. & Dev. Materials Sci. 4 (2018) 1-3.
"Investigation on Peritectic Layered Structures by Using the Binary Organic Components TRIS-NPG as Model Substances for Metal-Like Solidification"

J154. Liu Z., Vakhrushev A., Wu M., Karimi-Sibaki E., Kharicha A., Ludwig A., Li B.: Metals 8 (2018) 609:1-4. DOI:10.3390/met8080609
"Effect of an Electrically-Conducting Wall on Transient Magnetohydrodynamic Flow in a Continuous-Casting Mold with an Electromagnetic Brake"

J153. Karimi-Sibaki E., Kharicha A., Wu M., Ludwig A., Bohacek J.: J. Electroch. Soc., 165 (2018) E604-E615. DOI:10.1149/2.1201811jes
"Contribution of an Electro-Vortex Flow to Primary, Secondary and Tertiary Electric Current Distribution in an Electrolyte"

J152. Bohacek J., Kharicha A., Ludwig A., Wu M., Karimi-Sibaki E.: Metall. Mater. Trans. B 49 (2018) 1421-1433. DOI: 10.1007/s11663-018-1220-0
"Heat Transfer Coefficient at Cast-Mold Interface During Centrifugal Casting: Calculation of Air Gap"

J151. Stefan-Kharicha M., Kharicha A., Wu M., Ludwig A.: Metall. Mater.Trans. A, 49 (2018) 1708-1724.
"On the Coupling Mechanism of Equiaxed Crystal Generation with the Liquid Flow Driven by Natural Convection During Solidification"

J150. Barati H., Wu M., Kharicha A., Ludwig A.: Powder Technology 329 (2018) 181–198.
"A transient model for nozzle clogging"

J149. Zheng Y., Wu M., Karimi-Sibaki E., Kharicha A., Ludwig A.: Int. J. Heat and Mass Trans. 122 (2018) 939–953.
"Use of a mixed columnar-equiaxed solidification model to analyse the formation of as-cast structure and macrosegregation in a Sn-10 wt% Pb benchmark experiment"

J148. Zheng Y., Wu M., Kharicha A., Ludwig A.: Modelling Simul. Mater. Sci. Eng. 26 (2018) 015004 1-18.
"Incorporation of fragmentation into a volume average solidification model"

J147. Wu M., Ludwig A., Kharicha A.: Steel Res. Int. 89 (2018) 1700037 1-14.
"Simulation of As-Cast Steel Ingots"

J146. Wu M., Ahmadein M., Ludwig A.: Front. Mech. Eng. 13 (2018) 53–65.
"Premature melt solidification during mold filling and its influence on the as-cast structure"

J145. Karimi-Sibaki E., Kharicha A., Wu M., Ludwig A., Bohacek J.: Ionics 24 (2018) 2157-2165.
"Confrontation of the Ohmic approach for with the ionic transport approach for modeling the electrical behavior of an electrolyte"

J144. Karimi-Sibaki E., Kharicha A., Wu M., Ludwig A., Bohacek J.: Appl. Math. 357 (2018) 357-373.
"Modeling electrochemical transport of ions in the molten CaF2 –FeO slag operating under a DC voltage"

J143. Kharicha A., Karimi-Sibaki E., Wu M., Ludwig A., Bohacek J.: Steel Res. Int. 89 (2018) 1700100 1-20.
"Review on Modeling and Simulation of Electroslag Remelting"

J142. Karimi-Sibaki E., Kharicha A., Wu M., Ludwig A., Bohacek J., Holzgruber H., Ofner B., Scheriau A., Kubin M.: Appl. Thermal Eng. 130 (2018) 1062–1069.
"A multiphysics model of the electroslag rapid remelting (ESRR) process"

J141. Bohacek J., Kharicha A., Ludwig A., Wu M., Karimi-Sibaki E., Paar A., Brandner M., Elizondo L., Trickl T.: Appl. Math. Comput. 319 (2018) 301-317.
"A (non-)hydrostatic free-surface numerical model for two-layer flows"

 

  further Journal Publications


 

Books and Contributions to Books (2018-2020)

B23. Barati H., Wu M., Holzmann T., Kharicha A., Ludwig A.: in "CFD Modeling and Simulation in Materials Processing 2018", ISBN: 978-3-319-72059-3, Eds. Nastac L. et al. Springer, Cham, (2018) 149-158.
"Simulation of Non-metallic Inclusion Deposition and Clogginf of Nozzle"

B22. Holzmann T., Ludwig A., Raninger P.: in "Materials Processing Fundamentals 2018", ISBN: 978-3-319-72131-6, Eds. Lambotte G. et al., Springer, Cham, (2018) 77-85.
"Yield Strength Prediction in 3D During Local Heat Treatment of Structural A356 Alloy Components in Combination with Thermal-Stress Analysis"

further Books and Contribution to Books


 

Conference Proceedings (2018-2020)

C190. Ludwig A., Rodrigues C., Wu M., Kharicha A.: MCWASP XV, IOP Conf. Series: Mater. Sci. Eng. 861 (2020) 012066.
"Modelling of shear bands during solidification"

C189. Zhang H., Wu M., Zhang Z., Ludwig A., Kharicha A.: MCWASP XV, IOP Conf. Series: Mater. Sci. Eng. 861 (2020) 012048.
"Influence of crystal fragmentation on the formation of microstructure and macrosegregation during directional solidification under forced convection condition"

C188. Rodrigues C., Ludwig A., Wu M., Kharicha A., Vakhrushev A.: MCWASP XV, IOP Conf. Series: Mater. Sci. Eng. 861 (2020) 012042.
"Impact of crystal sedimentation and viscoplastic semi-solid dynamics on macrosegregation"

C187. Wu M., Stefan-Kharicha M., Kharicha A., Ludwig A.: MCWASP XV, IOP Conf. Series: Mater. Sci. Eng. 861 (2020) 012041.
"Numerical investigation of an in-situ observed flow regimes during solidification of an NH 4Cl - 70wt%H 2O solution"

C186. Zhang Z., Wu M., Zhang H., Karimi-Sibaki E., Ludwig A., Kharicha A.: MCWASP XV, IOP Conf. Series: Mater. Sci. Eng. 861 (2020) 012024.
"Modeling mixed columnar-equiaxed solificiation of Sn-10wt% alloy under forced convection driven by travelling magnetic stirring"

C185. Vakhrushev A., Kharicha A., Wu M., Ludwig A., Nitzl G., Tang Y., Hackl G., Watzinger J., Rodrigues C.: MCWASP XV, IOP Conf. Series: Mater. Sci. Eng. 861 (2020) 012015.
"Modelling viscoplastic behavior of solidifying shell under applied electromagnetic breaking during continuous casting"

C184. Kharicha A., Karimi-Sibaki E., Wu M., Ludwig A.: Liquid Metal Proc. & Casting Conf. (LMPC2019), Birmingham, UK (2019) pp. 11-16
“Investigations on Collective Motion of Cathode Spots in the VAR Process”

C183. Karimi-Sibaki E., Kharicha A., Wu M., Ludwig A., Bohacek J., Holzgruber H., Ofner B., Scheriau A., Kubin M.: Liquid Metal Proc. & Cast. Conf. (LMPC2019), Birmingham, UK (2019) pp. 55-62
“Numerical Investigation of the Vacuum Arc Remelting (VAR) Process”

C182. Chaulet J., Kharicha A., Dussoubs B., Charmond A., Jardy A., Hans S.: Liquid Metal Proc. & Cast. Conf. (LMPC2019), Birmingham, UK (2019) pp. 107-116
“DNS and Engineering Modeling of the Electroslag Remelting Process”

C181. Karimi-Sibaki E., Kharicha A., Wu M., Ludwig A., Bohacek J.: Liquid Metal Proc. & Cast. Conf. (LMPC2019), Birmingham, UK (2019) pp. 131-138
“Modeling Electrochemical Transport of Ions in the ESR Process”

C180. Vakhrushev A., Kharicha A., Liu Z., Wu M., Ludwig A., Nitzl G., Tang Y., Hackl G., Watzinger J.: 8th Int. Conf. on Mod. & Simul. of Metall. Processes in Steelmaking (STEELSIM2019), Toronto, Canada (2019) pp. 615-619
"Optimizing the flow conditions in the thin-slab casting mold using electromagnetic brake"

C179. Wu M., Barati H., Kharicha A., Ludwig A.: 8th Int. Conf. on Mod. & Simul. of Metall. Processes in Steelmaking (STEELSIM2019), Toronto, Canada (2019) pp. 664-667
"Using a numerical model to study the transient clogging phenomena in SEN during continuous casting of steel"

C178. Mogeritsch J.P., Pfeifer T., Ludwig A.: 5th Int. Conf. Adv. Solid. Proc. (ICASP-5) combined with 5th Int. Symp. Cutting Edge of Comp. Sim. of Solid., Cast. and Refining,Salzburg, Austria, IOP Conf. Series: Mater. Sci. & Eng., 529 (2019) 012025 .
"Formation of micro-plumes at a planar solid liquid interface in a temperature gradient"

C177. Jäger, S., Ludwig A.: 5th Int. Conf. Adv. Solid. Proc. (ICASP-5) combined with 5th Int. Symp. Cutting Edge of Comp. Sim. of Solid., Cast. and Refining, Salzburg, Austria, IOP Conf. Series: Mater. Sci. & Eng., 529 (2019) 012028.
"Efficient model for the prediction of dendritic grain growth using the lattice Boltzmann method coupled with a cellular automaton algorithm"

C176. Rodrigues C., Ludwig A., Wu M., Kharicha A., Vakhrushev A.: 5th Int. Conf. on Adv. Solid. Proc. (ICASP-5) combined with 5th Int. Symp. on Cutting Edge of Comp. Sim. of Solid., Cast. and Refining, Salzburg, Austria, IOP Conf. Series: Mater. Sci. & Eng., 529 (2019) 012041.
"On the modelling of macrosegregation during twin-roll casting"

C175. Vakhrushev A., Kharicha A., Wu M., Ludwig A., Nitzl G., Tang Y., Hackl G., Watzinger J., Rodrigues C.: 5th Int. Conf. on Adv. Solid. Proc. (ICASP-5) combined with 5th Int. Symp. on Cutting Edge of Comp. Sim. of Solid., Cast. and Refining, Salzburg, Austria, IOP Conf. Series: Mater. Sci. & Eng., 529 (2019) 012081.
"On modelling viscoplastic behaviour of the solidifying shell in the funnel-type continuous casting mold"

C174. Vakhrushev A., Kharicha A., Ludwig A., Nitzl G., Tang Y., Hackl G., Watzinger J.: Solidification: computer simulation, experiments and technology 2019. Ischewsk, Russia, 85-87.
"On modelling parasitic solidification due to heat loss at submerged entry nozzle region of continuous casting mold."

C173. Zheng Y., Wu M., Kharicha A., Ludwig A.: 1st Chinas Symp. on Stustainable Technology (CSST2018), Tianjin, China (2018) 355-357.
"Concept of semi-continuous casting for large steel strand: a numerical study"

C172. Barati H., Wu M., Kharicha A., Ludwig A.: 7th Int. Conf. Solidification and Gravity (SG 2018), Miskolc, Hungary, pp. 144-149.
"Discussion on possible solidification during SEN clogging in steel continuous casting"

C171. Mogeritsch J.P., Ludwig A.: 7th Int. Conf. Solidification and Gravity (SG 2018), Miskolc, Hungary, pp. 330-335.
"Investigation on the Binary Organic Components TRIS-NPG as Suitable Model Substances for Metal-Like Solidification"

C170. Mogeritsch J.P., Pfeifer T., Stefan-Kharicha M., Ludwig A.: 7th Int. Conf. Solidification and Gravity (SG 2018), Miskolc, Hungary, pp. 319-324.
"Investigation on the Liquid Flow ahead of the Solidification Front During the Formation of Peritectic Layered Solidification Structures"

C169. Zhang H., Wu M., Zheng Y., Ludwig A., Kharicha A.: 7th Int. Conf. Solidification and Gravity (SG 2018), Miskolc, Hungary, pp. 265-270.
"Numerical simulation of fluid flow in the mushy zone under rotation magnetic field: influence of permeability"

C168. Zheng Y., Wu M., Kharicha A., Ludwig A.: 7th Int. Conf. Solidification and Gravity (SG 2018), Miskolc, Hungary, pp. 226-231.
"Influence of nucleation and dendrite fragmentation on as-cast structure of Sn- 10wt.%Pb benchmark"

C167. Liu Z., Vakhrushev A., Wu M., Ludwig A., Li B., Xu G.: 7th Int. Congr. on Sci. and Techn. of Steel Making (ICS2018), Venice, Italy, 43.
"Numerical Modelling of Bubbly Flow in Continuous Casting Mold using Two Population Balance Approaches"

C166. Vakhrushev A., Liu Z., Wu M., Kharicha A., Ludwig A., Nitzl G., Tang Y., Hackl G.: 7th Int. Congr. on Sci. and Techn. of Steel Making (ICS2018), Venice, Italy, 159.
"Numerical Modelling of the MHD flow in continuous casting mold by two CFD platforms ANSYS Fluent and OpenFOAM"

further Conference Proceedings


 

Non Peer-Reviewed Publications (2018-2020)

 

N34. Mogeritsch J., Panzl G., Walzl A., Ludwig A.: 5th Metal Additive Manufacturing Confernce (MAMC 2020), Online Conference, 30.09.-02.10.2020
Numerical Simulation of Heat Treatment of Ti-6AI-4V by using a Phase-Field Method Based Software.

N33. Kharicha A., Karimi-Sibaki E., Wu M., Ludwig A.: Electrochemical Conf. on Energy and Environment: Bioelectrochem. and Energy Storage 2019 (ECEE 2019), Glasgow, Schottland
"Diffusion-Reaction-Limited Mass Transfer on the Surface of an Electrically Conductive Droplet"

N32. Mogeritsch P.J., Bottger B., Ludwig A.: International Conference Researchfora, Miami 23.-24. July 2019
"Calibration of Numerical and Determination of Physical Parameters for the Organic Model System TRIS-NPG."

N31. Mogeritsch P.J., Ludwig A.: Austrian Space Applications Programme 2008 
"Metastable Solidification of Composites. Novel Pertitectic Structures Studies with Transparent Model Alloys."

N30. Mogeritsch P.J., Ludwig A.: Res. Dev. Material Sci. 4 2018 (1-3).
"Investigation on Peritectic Layered Structures by Using the Binary Organic Components TRIS-NPG as Model Substances for Metal-Like Solidification"

N29. Mogeritsch P.J., Ludwig A.: Int. Jour. Trend Res. Dev. (2018) Special Issue.
"In-Situ Observation of Growth Morphologies in Organic Peritectics"

further Non Peer-Reviewed Publications